Obiettivo
The work is related to the design, manufacturing and testing of a Robotic system to Retrieve Tubes (TRR) from a steam generator of Latina Magnox Power Plant owned by ENEL. The retrieved material will be characterized radiochemically, melted and characterized again with a view to reuse.
The use of TRR will allow the reduction from 40 mSv to about 2 mSv of the radiation dose to workforce and a significant cost reduction mainly due to the reuse of obtained material.
The objective of the proposed project is the detailed study of a dismantling technique based on a robotic system and characterization of the material obtained after melting. The Magnox steam generators are the largest contaminated plant items although activity levels are low.
The results of the work should strengthen the cost-effectiveness of reusing material from decommissioning. Moreover, it will allow detailed information to be obtained about the radiological aspects of this technique and be applicable to other Magnox or gas/graphite type reactors.
A robotic system for the removal of tubes from a Latina steam generator has been designed. Definition of functional requirements of the system was made for lay out, technological and safety related aspects, allowing the development of the conceptual design and the progress of design activities up to the constructive assembly and subassembly drawings.
A preliminary activity of qualification tests, in particular to define the essential parameters of the cutting operation, has been carried out, providing useful information for detailed design and elements for a more accurate time estimate.
The system is composed of 2 parts: the tube cutting and retrieval device; the contamination containment system.
The cutting and retrieval device operates inside the steam generator and the contaminated area is isolated from the external environment by means of a confined working cabin; the cutting system is remotely controlled by a console located outside the confined cabin. A visual and instrumental monitoring system allows the operator to survey the various working phases which are executed in a semiautomatic mode. The architecture of the control system has been defined on the basis of the operative sequence enabling software development and hardware definition.
WORK PROGRAMME
1. System requirements definition and studies (ANSALDO with ENEL support)
1.1. Analysis of the robotic system (TRR) layout and of the environmental and radiological conditions (in cooperation with ENEL)
1.2. Functional requirements definition of the TRR
1.3. TRR design at system level (Two TRR designs will be investigated)
2. Mock-up design and manufacturing (ANSALDO)
2.1. Design of a SG tube nest mock-up based on real geometric requirements
2.2. Mock-up manufacturing and installation in the Ansaldo testing facility
3. TRR design and manufacturing (ANSALDO)
3.1. TRR detailed design based on 1 and control system design (Hardware and Software)
3.2. Mechanical part manufacturing, commercial part purchasing and assembly and integration of all parts.
4. Testing of the TRR on the mock-up (ANSALDO)
5. Site preparation (ANSALDO with ENEL support)
6. TRR operation and material transportation (ANSALDO + ENEL & SIEMP. support)
6.1. TRR installation on the SG made available by ENEL
6.2. Tube cutting and removal; charging of cut material in the transport containers
6.3. Chemical and radiological characterization - Transportation to Siempelkamp, Krefeld
7. Restoration of the site
8. Radiochemical analysis (SIEMPELKAMP)
9. Melting (SIEMPELKAMP)
10. Radiochemical analysis (SIEMPELKAMP)
11. Generation of specific data
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sistemi di controllo
- scienze naturali informatica e scienze dell'informazione software sviluppo software
- scienze sociali economia e commercio economia e gestione aziendale occupazione
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
16161 Genova
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.