Obiettivo
The aim of "CPPS" test is to study the near field thermomechanical behaviour in deep layered salt around a borehole waste emplacement under thermal loading. This is of major importance for predicting the behaviour of radioactive waste storage particularly as regards to the temperature and the pressure that the canisters will have to withstand. The influence of marno anhydritic layers will be studied too.
The experiment is planned to include three tests in separate boreholes at Amélie potash mine (F), with identical heating probes but different types of thermal loadings and backfilling materials.
A prototype heater with an annulus between the heater and the borehole as small as possible (less than 5 mm) was installed in December 1991 in Mine Amelie. After a period of observation of the borehole creeping, the heater was turned on in May 1992. The heating power was a 2.4 kW. After 2 months the heating power was raised up to 4 kW in order to speed up the borehole creeping.
The convergency measurements of the gallery are strongly dependent on the air temperature. For example a five degrees increase of temperature multiplies by a factor 6 theconvergency rate. The horizontal and vertical displacements of the rock salt surrounding the experimental gallery have been measured in several places. Their difference can probably be explained by the influence of the horizontal marno anhydritic layers.
At the end of the first heating step the closure rate was very low. Three days after the increase of power the borehole was in contact with the probe. During the first step the maximum temperature was 120 C on the surface of the probe. During the second step the temperature has reached 200 C at this place and has nearly stabilized. At a distance of 70 cm from the axis of the probe the temperature reached 70 C.
The displacement of the rock salt reached 8 mm in surface and 4 mm at a depth of 2.65 m and nearly zero at a depth of 4.65 m.
Work programme:
1. CPPS 1: Emplacing of a prototype heater with an annulus between the heater and the borehole as small as possible (< 5 mm) and heating after having observed the borehole convergency.
2. CPPS 2: Emplacing of a heater with the annulus filled with crushed salt and immediate heating.
3. CPPS 3: Emplacing of a heater with an empty annulus and heating after having observed the borehole convergency.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia altre ingegnerie e tecnologie ingegneria nucleare gestione dei rifiuti radioattivi
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
92298 CHATENAY MALABRY
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.