Ziel
Because of the structural conditions and in terms of radiation protection a great number of cutting activities for the dismantling of nuclear installations are performed under water, either in situ (e.g. in LWR) or in specially designed basins. This strategy is especially true for highly activated RPVs and their internals. For the dismantling of these thick-walled and partly complex structured components cutting techniques and handling devices have to be developed and qualified, which are easy to handle, reliable, and flexible in their field of application.
Contact Arc Metal Cutting (CAMC) is thermal sputtering of metallic, i.e. electrically conductive materials by means of a discontinuous high power short circuit arc ignited by contact between the non-consuming electrode and the workpiece. Principally, the sectile material thickness depends on the geometry of the electrode. First tests showed promising 3 results in terms of applying this technique to material thicknesses beyond 300 mm. Above an effective wall thickness of the workpiece of 30 mm the cutting speed of CAMC.is in their same range as compared to plasma arc cutting. Complex geometries may be segmented with a simple, linear movement of the electrode, the shape of which depends on the cutting task, thus being a sward, a disk, or a rod with various cross secti In principle, reacting forces do not occur.
In order to reduce the electrode wear, there is a need for investigations on different electrode materials, on the optimization of the electrode cooling, the scavenging, and, the process control.
- Although no process gases are applied in CAMC, there appears to be a production of gaseous effluents, their amount being a function of the waterdepth. As it is true for all thermal cutting techniques, also CAMC produces aerosols, hydrosols and sedimented dross.
Detailed investigations and measurements of waste products shall be one major point of this project when cutting different materials in comparison, i.e. aluminum, stainless steel, and mild steel with a stainless steel plating. The light-weight CAMC-tool shall be guided by means of a remote operated modular Manipulator Handling System (MHS) of Voest-Alpine/MCE, which is carried by a three axes handling device, of which CIEMAT and the Institut fuer Werkstoffkunde/University of Hanover have a similar system in their facility, each. Apart from adapting the MHS to the given underwater task, which includes the interfaces to the CAMC-tool and the handling device, a system for the control and monitoring of the complete performance will be applied, including sensors and underwater cameras.
Both, the CAMC-tool and the manipulator shall be qualified in cold tests on representative mock-ups of the components to be dismantled. Cutting of activated material shall be performed in the facility of the JEN-1 experimental reactor of CIEMAT after these trials.
The application of the MHS in JEN-1 within the time scale of this proposed project depends on the legal situation, though. Because of this, the CAMC-tool will be designed as such, that it can also be connected to the handling device of CIEMAT directly. The results of the measurements of waste products in this phase shall be compared to those gathered during cold testing.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
30167 HANNOVER
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.