Optimisation of mechanisms taking manufacturing tolerance into account

Projektinformationen

ID Finanzhilfevereinbarung: FMBI971947

Startdatum 18 August 1997

Enddatum 17 Februar 1999

Finanziert unter

• Specific research and technological development programme in the field of the training and mobility of researchers, 1994-1998

Gesamtkosten € 0,00

EU-Beitrag Keine Daten

Koordiniert durch

University of Cambridge
United Kingdom

Ziel

Research objectives and content
This project is concerned with the dimensional synthesis of mechanisms, and in particular with the link between optimal configurations and their sensitivity to manufacturing tolerances. Standard mechanism optimisation strategies aim to find the "best" configuration that satisfies a set of given constraints, but neglect the possible effects of manufacturing tolerances on the actual behaviour of the mechanism. In complex, three-dimensional mechanisms for deployable or adaptive structures these effects can be significant and totally unexpected. For example, a rigid-panel antenna design recently developed at Cambridge University has shown unexpected asymmetries during deployment although it was intended to deploy in a regular, symmetric way.
This project aims to develop new optimisation strategies for the "robust" design of mechanisms. In the case of mechanisms where the global optimal design is potentially sensitive to manufacturing tolerances, the new approach will aim for good, relatively insensitive, sub-optimal designs. Training content (objective, benefit and expected impact)
The project will give the opportunity to investigate theoretically an important aspect of design optimisation not thoroughly examined in the literature until now and to appiv the results to an industrially relevant example.
Links with industry / industrial relevance (22)
The project will be an important contribution to the realization of new deployable and adaptive structures. The new concept of rigid-panel deployable antenna that will be investigated has a number of advantages over previous concepts: it is mechanically less complex and has a better packaging ratio

Programm/Programme

• FP4-TMR - Specific research and technological development programme in the field of the training and mobility of researchers, 1994-1998

Thema/Themen

• 0302 - Post-doctoral research training grants
• TI01 - Mechanical Engineering

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

RGI - Research grants (individual fellowships)

Koordinator

University of Cambridge

• EU-Beitrag: Keine Daten
• Adresse: Trumpington Street ; CB2 1PZ Cambridge ; Vereinigtes Königreich
• Gesamtkosten: Keine Daten

Beteiligte (1)

Not available

Deutschland

• EU-Beitrag: Keine Daten
• Gesamtkosten: Keine Daten