Obiettivo
The aim of this project is to demonstrate the feasibility of a space-variant silicon sensor with color acquisition capability.
To achieve this goal we intend to investigate two different technological approaches:
- The "integrated' approach where we intend to use a color deposition process to modify some of the currently available CMOS chip (it is not required to fabricate a new chip).
- The "system'' approach where we intend to use a new technology based on ferroelectric liquid crystal (FLC) based color filters (available on the market). This device allows to electrically change the color characteristics of the filter (mounted either on the chip or the camera lens) and, in particular, to acquire the red, green and blue components of a scene using a B/W camera.
The two solutions have, of course, advantages and disadvantages. The integrated solution is, in perspective, the most interesting one.
Among the pros: i) cost will be lower, ii) the system will be simpler, iii) the technology for color chip fabrication (particularly for special purpose applications) is strategically important for the European industry. On the converse, the deposition of color micro filters, reduces the resolution of the overall image and, therefore, requires, a comparatively higher number of pixels.
The "system" solution has the advantage of exploiting all the spatial resolution available on the chip at the expenses of a higher cost and complexity. The reduced temporal resolution (required to acquire the sequence of RGB components) is not really a problem because, due to the relatively small number of pixels acquired by a space-variant sensor, the ``absolute'' frame rate can be higher than conventional cameras (with the same technology) providing, at the end, the required frame rate.
The first phase of the project is aimed at building two prototypes adopting the two solutions described above. These solutions will then be compared and, according to the overall results and to the results of the comparison, a second phase project will be submitted, if necessary, to design a fully integrated space-variant color camera.
The assessment of the results of the project will be based on the experience acquired and the procedures used in the IBIDEM project where the user's acceptability of the proposed solution was tested experimentally with the help of hard-of-hearing and deaf persons.
Qualitative as well as quantitative data will be collected and comparison with the already available data based on a Black and White space-variant solution will be reported.
The use of space-variant visual sensors in image communication and processing is gaining more and more attention as a simple and direct way of reducing the visual information transmitted and/or processed while preserving both high resolution and a wide field of view. At present two different implementations of the space-variant concept have been realised at IMEC in collaboration with DIST. The first of such sensors was fabricated using CCD technology (the chip contained about 2,000 photocells) in 1989. The second, using CMOS technology and about 8,000 photocells, has been designed and fabricated within an ongoing EU-supported project (TIDE project IBIDEM P1038) and is now in the testing phase. Both sensors acquire black and white images.
However the possibility of acquiring color images, is bound to become an important factor particularly for some image processing applications (e.g. quality control and surveillance) and for image transmission (e.g. multimedia communication, video telephony etc.).
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria dei materiali colori
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sensori sensori ottici
- scienze naturali scienze chimiche chimica inorganica metalloidi
- ingegneria e tecnologia ingegneria dei materiali cristalli liquidi
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
OIF - Marie Curie actions-Outgoing International Fellowships
Coordinatore
16145 Genova
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.