Objectif
The objective of the QUEST project is to push the fabrication of silicon based devices below the 20 nm limit using SPM-based (scanning probe microscopy) lithography in order to:
- take advantage of the Coulomb blockade effect in an innovative architecture of single electron memory operating at room temperature
- to study transport in low dimensionality structures that exhibit physical effects such as ballistic transport, quantum interference and single electron phenomena,
- demonstrate the efficiency of a fabrication process that uses local probes (e.g. STM-Scanning Tunnelling Microscopy, AFM-Atomic Force Microscopy) for fine and reproducible patterning.
Nanometer scale structures in which dimensional confinement (e.g. resonant tunnelling, Coulombic effects...) become first order effects will result in new opportunities and concepts to take full advantage of low power quantum electronics. However, the path to the optimal use of these effects in solving problems of mainstream technology is still not clear. On the other hand, scanning probe microscopy (SPM) techniques that have demonstrated potential for atomic-level manipulation of matter have not yet been fully developed to solve fine patterning constraints at the nanometer scale.
The QUEST project has the objective to develop device concepts and fabrication techniques relevant for future industrial applications:
- the integration of memory circuits using the Coulomb blockade is probably the most obvious application that meets the scaling and low-power requirements necessary for the giga to tera bit capacity.
- processing (deposition, etching, oxidation), experimental, and theoretical developments necessary to this project will contribute to further developments of microelectronics. In particular, the fabrication sequence proposed for the integration of the memory cell will also allow for the fabrication of MOSFETs with ultimate dimensions. This constitutes an intermediate milestone of major interest for potential applications that combine quantum and conventional silicon-based devices
- the introduction of the SPM for direct device applications could probably provide a driving force for the evolution of this technique as a highly performant fabrication tool. In addition, this project directly supports our industrial partners OMICRON and INSTRUMAT on SPM usage.
The operating principle of the memory is based on the storage of very few electrons (possibly one) in a floating gate embedded between a MOSFET channel and a command gate. Memory operation is achieved as following: by applying a positive gate voltage an electron is transferred to the storage dot and increases its potential that blocks the transfer of others electrons. The trapping of an electron in the dot shifts the threshold voltage of the MOSFET that can be detected to sense the information (formation of an hysteris on the current/gate-voltage characteristic). The novelty and originality of the approach lies in the fabrication of such an advanced memory cell using SPM techniques combined with self-aligned thin-film deposition and etching.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences chimiques électrochimie électrolyse
- sciences naturelles sciences physiques optique microscopie
- sciences naturelles sciences physiques électromagnétisme et électronique microélectronique
- sciences naturelles sciences chimiques chimie inorganique métalloïde
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Mots‑clés
Les mots-clés du projet tels qu’indiqués par le coordinateur du projet. À ne pas confondre avec la taxonomie EuroSciVoc (champ scientifique).
Les mots-clés du projet tels qu’indiqués par le coordinateur du projet. À ne pas confondre avec la taxonomie EuroSciVoc (champ scientifique).
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
59046 Lille
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.