Ziel
The target of the project is to solve the needs and problems of the factories in a recent future and the ways that the manufacturing processes will be aimed by using the emergent technology based on the principles of the parallel kinematics. The project will get a breakthrough in the implementation of parallel kinematics in industry. MACH21 will undertake the whole scope of actual constrains to extend the use of such manufacturing conception and to act as the snow-ball effect through the partnership. The actual limits will be overcome by the benefits of such systems: simple, flexible, low-cost, light weight, cross-sectoral application, minimum use of resources, itself and during operation. This way, the project facilitates the development, manufacturing and use of parallel kinematics machines.
-Optimized joints for a wide range of processes with different characteristics and problematic:
-3 rotational degree of freedom ball joint with smaller dimensions;
-Lightweight / cheap joints both for 2 or 3 degrees of freedom;
-Ball joint (3 rotational degrees of freedom) with plain bearings;
-Improved in behaviour telescopic struts and drives:
-More accurate and compact telescopic strut with integrated measuring system;
-Hollow-shaft ball screw drive for telescopic struts;
-Linear-direct drive actuated strut;
-Test bed to characterize the static, thermal and dynamic performance of the most critical components of PKMs, namely, joints and struts;
-Sensor arrangements for direct and indirect measurement of the TCP:
-Non-contact vision-based direct TCP-measuring sensor-arrangement;
-Method to use sensor redundancy (more sensors than machine degrees of freedom) to enhance PKM accuracy;
-Direct forceless TCP-measuring sensor-arrangements;
-Strategies for the advisable specific multi-axis control of PKMs;
-Software control technique to use actuation redundancy (more drives than degrees of freedom of the mechanism) to overcome PKM singularities.
Method for a priori analysis of the PKMs dynamic behaviour based on multi-body-dynamics-simulations and flexibility information of machine parts from FE-calculations:
-Specific PKM designs and configurations for different processes for achieving big tilting angles of the moving platform with acceptable mechanical performance of the machine;
-Specific PKM designs to linearize the force transmission ratio from the joint space to the tool Cartesian space;
-Method for analysis of the PKMs dynamic behaviour with multi-body models coupled with exact models of the drive controllers and the NC (closed-loop simulation);
-Calibration processes and strategies to improve the static accuracy of PKMs;
-Specific PKM designs and configurations for tackling the following processes of the industrial partners in the Consortium: horizontal and vertical milling in 3 and 5 axes (automotive, aeronautic and mould and die sectors); fibers weft laying (textile sector); handling of parts (automotive sector); deburring of cast iron parts (general purpose machining sector); assembly of aeronautical skins in skeletal structures of ribs and spars (aeronautic sector);
-Error compensation tool to describe and compensate all errors non detected by an analytical model-based calibration;
-Software programs for aiding the designers to evaluate the capability of a particular PKM architecture in a preliminary conceptual design stage;
-Parallel kinematics technology demonstrator prototypes for the following industrial processes and sectors;
-Heavy parts handling prototype (automotive sector)Ø 5 axes horizontal milling prototype (aeronautic sector) 5 axes vertical milling prototype (mould and die sector);
-"Heavy Tow" fibers layer prototype (textile sector);
-Thin panels assembly in skeletal structures of ribs and spars virtual prototype (aeronautic sector).
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Werkstofftechnik Fasern
- Technik und Technologie Maschinenbau Produktionstechnik subtraktives Fertigungsverfahren
- Technik und Technologie Maschinenbau Fahrzeugbau Automobiltechnik
- Technik und Technologie Werkstofftechnik Textilien
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Sensoren
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
20870 ELGOIBAR
Spanien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.