Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-05-27

Cyclic operation of trickle bed reactors

Ziel

Trickle bed reactors are used in many chemical operations with rather high heat generation rates. Their drawbacks are the chance for runaways and thereby unsafety, moreover the selectivity to the desired product is less than wanted. During the last decade in different chemical engineering laboratories the insight has grown that cyclic operation will improve on the aspects of bad selectivity and unsafety. Cyclic operations can be performed in one of two ways:
- in the slow mode, where with a time interval of the order of minutes periodic changes of liquid feed rate and/or reactant concentration are forced, or;
- in the fast mode where short pulses of liquid, in the order of seconds, travel through the column.

The combination of non-steady state reactants behaviour and non-steady state hydrodynamics, mass and heat transfer makes a good design very complicated. Scientists of five principal laboratories, together with industries did gather within a thematic network and now have set up a project to combine good basic research to obtain a complete set of sesign and operation rules that will make this new technology available for implementation. The project will have a high radiative impact on many other processes in the chemical industry where forced cyclic operation can be used to achieve higher conversions, selectivity, safety and less waste.
It has been shown in the project that unsteady state operation has better conversion than conventional operation of trickle beds. In several experimental cases conducted in this project it was observed that higher conversion can be obtained while operating under cycling liquid flow conditions. Also it has been found that the mechanism for improvement of trickle bed reactors is mainly found in improved gas-liquid mass transfer. Although safety of the reactors is also influenced by cyclic operation, it could not be shown that pockets of liquids occurring in steady state were better refreshed under cyclic operation. A methodology for selection of cyclic operation of trickle beds as the reactor of choice was developed based on a heuristic methodology and it has been implemented in a commercially used software tool. The project also derived correlations, a reactor model and design methodology to size reactors and to find operating conditions which results are incorporated in the tools used by the reactor design departments of several industrial and company partners. To this end quite some experimental work has been conducted on lab and pilot scale at universities and at the facilities of industrial partners and sub-contractors. An important result from the project is the experimental data obtained and which, through publications in scientific literature, can be used by other groups for modelling or design purposes. The systems investigated are the catalytic hydrogenations of a-methyl styrene and of dicyclopentadiene.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

CSC - Cost-sharing contracts

Koordinator

DSM RESEARCH BV
EU-Beitrag
Keine Daten
Adresse
Koestraat 3
6160 MD GELEEN
Niederlande

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (9)

Mein Booklet 0 0