Objectif Nowadays the production shemes of natural stone manufacturing companies, and particularly those manufacturing granite products, are quite constrained by the limitations of current sawing machinery that seem to have reached an efficiency limit. This situation has no perspectives of improvement unless the whole model is restructured. The present project intends to design an innovative system for sawing granite blocks, based in a new concept that radically changes the current procedures of traditional machinery. This new concept integrates innovative ideas both for the mechanical design (including an original arrangement of the sawing elements: a bi-wire machine, a penta-wire machine and a final multi-wire machine and block handing devices: rail supported), the sawing tool itself and the waste management not using pollutant components, in a quite simple system. The expected efficiency rounds seven times that of the traditional methods. Champ scientifique engineering and technologyenvironmental engineeringwaste management Programme(s) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Thème(s) 1.1.3.-1. - Key Action Innovative Products, Processes and Organisation Appel à propositions Data not available Régime de financement EAW - Exploratory awards Coordinateur GRANITOS DE ATIOS S.A. Contribution de l’UE Aucune donnée Adresse Poligono Industrial a Granxa 36400 PORRINO Espagne Voir sur la carte Coût total Aucune donnée Participants (1) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire BIDELEIMPIANTI DI BIDESE ILARIO & C SNC Italie Contribution de l’UE Aucune donnée Adresse Via S. Iberto 38 36042 BREGANZE Voir sur la carte Coût total Aucune donnée