Obiettivo Nowadays the production shemes of natural stone manufacturing companies, and particularly those manufacturing granite products, are quite constrained by the limitations of current sawing machinery that seem to have reached an efficiency limit. This situation has no perspectives of improvement unless the whole model is restructured. The present project intends to design an innovative system for sawing granite blocks, based in a new concept that radically changes the current procedures of traditional machinery. This new concept integrates innovative ideas both for the mechanical design (including an original arrangement of the sawing elements: a bi-wire machine, a penta-wire machine and a final multi-wire machine and block handing devices: rail supported), the sawing tool itself and the waste management not using pollutant components, in a quite simple system. The expected efficiency rounds seven times that of the traditional methods. Campo scientifico engineering and technologyenvironmental engineeringwaste management Programma(i) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Argomento(i) 1.1.3.-1. - Key Action Innovative Products, Processes and Organisation Invito a presentare proposte Data not available Meccanismo di finanziamento EAW - Exploratory awards Coordinatore GRANITOS DE ATIOS S.A. Contributo UE Nessun dato Indirizzo Poligono Industrial a Granxa 36400 PORRINO Spagna Mostra sulla mappa Costo totale Nessun dato Partecipanti (1) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto BIDELEIMPIANTI DI BIDESE ILARIO & C SNC Italia Contributo UE Nessun dato Indirizzo Via S. Iberto 38 36042 BREGANZE Mostra sulla mappa Costo totale Nessun dato