Obiettivo
The renovation of the Buchenmuehle am Kocher Hydro Power Plant is intended to substitute the existing 2 old and uneconomic horizontal Francis open flume turbines, each with a 6 m3/s absorption capacity and a 6,45 m head by an innovative Kaplan S-reverse turbine incorporating combined double and frequency regulation and a particularly innovative, environmentally-friendly lubricant-free bearing technology. The first-time use of turbines of this size will also increase the power station's design water flow from 12 up to 14 m3/s, thereby increasing generation to 3,7 GWh in total.
The use of only one turbine assembly and improved runner geometry will significantly increase the economy of the proposed solution compared with a conventional turbine. This measure will enable the power station to generate environmentally-friendly, regenerative energy under economical conditions for other 50 years.
The project is currently in the planning phase. Initial result can be anticipated at the earliest after commissioning.
The existing turbine system contains two horizontal Francis open flume turbines with a vertical suction pipe into the underwater chamber. In future, one of the existing turbine chambers will serve as the inlet area, corresponding to the upper third of the S shape of the tubular turbine. The inlet pipe to the turbine is housed in the underwater chamber cover together with the connected elbow. Downstream of the inlet elbow, the turbine is positioned on the base of the current underwater chamber. The downstream concrete suction pipe cuts off the newly created machine chamber from the downstream works water. The suspended material occuring with the works water is moved by a screen cleaning machine. This functions on the same principle as an hydraulic dreger and removes the screenings automatically without the use of a screening transport unit.
The innovative part of the project is based on the followlng solutions:
- the annual power generation is optimized by the new double frequencyregulation (efficiency optimization)
- of all possible turbine types, it requires the lowest amount of conversion work
- the lowest underwater cavity is reached, thanks to horizontal installation of the turbine shaft
- the influences of the suction pipe are reduced compared to standard S tubular turbines
- the turbine type allows direct coupling of the turbine shaft to the generator, thus enabling the transmission unit to be omitted thereby reducing, sound emissions, omission of oil lubrication, omission of cooling, more economical design
- the turbine allows the installation of environmentally-friendly innovative bearing systems, resulting in it beeing impossible for lubricants to enter the water due to water lubricated underwater guide bearing water lubricated runner hub, self-lubricating lubricant free vane bearings
- combining all decentralized control units into a programmable logic controller with optimum processing, of all binary and analog, signals, comnbined with an all-in-all more economical design is possible
On the basis of an economy calculation, the energy generation costs are 0,1 17 DM/kWh. This figure is below the limit generation costs of 0,157 DM/kWh calculated for this location.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
48950 Erandio
Spagna
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.