Ziel
Draught is one of the most serious complaints from occupants in buildings, vehicles, etc. Specifications for draught discomfort appear in the present indoor climate standards. Measurements of air temperature, mean velocity and turbulence intensity of the airflow must be performed in order to assess draught discomfort. Low velocity thermal anemometers are the instruments most used at present to perform these measurements as they are simple to use and inexpensive. The accuracy of the mean velocity and turbulence intensity measurements depends on several factors: the calibration of the instrument and its dynamic behaviour, the directional sensitivity of the velocity sensor and the free convection flow it produces, the design of the sensor and the instrument, etc. Recommendations for the characteristics of the anemometers that will ensure accurate measurements are specified in the standards. The recommendations are based on the separate impact of each of the above factors on the accuracy of the measurements, on the assumption that low velocity anemometers have the same dynamic behaviour. However, recent research shows that their behaviour differs. Furthermore, the accuracy of the low velocity measurements in practice depends on the simultaneous impact of two or more factors on the accuracy of the measurements. This impact can be additive, synergistic or antagonistic. It is difficult and time-consuming to identify this impact experimentally. The accuracy of the low velocity thermal anemometers available on the market is not sufficient to measure draught discomfort as required in the standards and has to be improved. Further, there is a need to define realistic draught requirements in the standards that can be assessed by measurements in practice using low velocity thermal anemometers.
The objectives of the proposed research are:
1) to improve the accuracy of mean velocity and turbulence intensity measure ments made with low velocity thermalanemometers;
2) to analyse and to identify combined effects of error sources for low velocity thermal anemometers and to establish accuracy levels for draught measurement in practice;
3) to make new specifications for draught discomfort in future indoor climate standards;
This research will enable the accuracy of mean velocity and turbulence intensity measurements to be increased by modifying the design of low velocity thermal anemometers and improving their dynamic behaviour. It will establish bases for the development of new measurement instruments. The impact of systematic and non-systematic error sources on low velocity measurements in practice will be analysed. A mathematical model of a low velocity thermal anemometer will be developed. All error sources will be incorporated in the model. A large available database from comprehensive full-scale room measurements of instantaneous velocity (made by a threedimensional laser doppler anemometer) and of instantaneous temperature will be analysed by the model. This will enable the highest accuracy for draught measurement in practice to be identified and will ensure that realistic requirements for draught discomfort in buildings, vehicles, industry, etc. are incorporated in indoor climate standards.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Informatik und Informationswissenschaften Datenbank
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Sensoren
- Naturwissenschaften Naturwissenschaften Optik Laserphysik
- Naturwissenschaften Mathematik angewandte Mathematik mathematisches Modell
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
2800 Lyngby
Dänemark
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.