Ziel
Minimizing of energy consumption for the crushing of cement clinker and additives through process engineering measures in the pre-grinding stage. Reduction of the specific energy requirements by approx. 20% per ground ton of feed material through the installation of a pre-crusher.
1. Achieved throughput of the clinker precrushing installation
It has to be distinguished between the maximum possible throughput and an optimum throughput taking into consideration an acceptable wear rate.
The optimized operation performance is 55 t/h finish product at a particle size of up to 3 mm.
2. Achieved throughput of the slag cement grinding installation
During continuous operation the following figures were achieved:
Cement type HOZ 35 - NW - HS-NA containing :
26% clinker
6% gypsum
68% high furnace sand
Cement fineness 4,300 cm2/g acc. to Blaine
Throughput of 11.74 t/h grinding installation
This represents a performance increase of 23.5% compared with the original situation.
3. Achieved energy saving of the grinding installation
The throughput of both of the slag cement grinding installations was increases from 19 t/h to 23.48 t/h. The energy consumption was reduced from 88.8 kWh/t to 73.2 kWh/t. Thus, the energy saving was 15.6 kWh/t.
4. The modernized precrushing andgrinding installation contains the following main components :
4.11 pce Horizontal Impact Crusher, type CPB HIC 130
1 pce Vibrating screen, type Haver & Boecker
2 pces HOZ one-chamber-mills
2 pces High Performances Separator, type QDK 16,5 N
as well as various peripherical installations.
The ball mill is the main grinding device of the cement production. Within the mill clinker and additives are being grinded and mixed. Referring to the ideal particle size fraction the grinding effect of a ball mill is only 6-9%. With the impact crusher the grinding effect may represent up to 40%. By transferring part of the grinding process from the ball mill to the impact crusher the energy saving effect amounts to a considerable 20%. The ball mill remains as a device for ultra fine grinding and mixing.
Cement clinker and additives are ground to cement, of the types PZ 35 and HOZ 35 in the cement plant Coswig-Wuelfarther Baustoff GmbH. The design of the mill is based on the grindability of the materials to be ground, i.e. cement clinker and additional components. Four mills, whose grinding chamber divisions and grinding charge filling rate are based on experience values and on a calculational basis, are in operation. A certain amount of energy is required for grinding in a crushing facility of this design. Through the relocation of a part of the crushing process onto a pre-crushing facility and through a changed technique for an optimal total design of the grinding facility, an increase in production with a simultaneous reduction in specific energy requirements is to be expected.
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
59269 BECKUM
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.