Obiettivo
The project was concerned with plastic moulding SMEs, i.e. mould-makers and moulders in Europe, and deals with the diffusion of tools aimed at the simulation of moulding material flow. It was implemented by a partnership composed of a leader partner (ASTER - I), three intermediary organisations (ASTER - I, Pole Europeen de Plasturgie - F, ALMI Foretagspartner - SE) and 8 pilot companies (three Italian, three Swedish and two French companies). In addition to the pilot companies, other SMEs also became involved and benefitted from the experience gained through project participation.
SMEs in this sector are, in general, experienced in the use of computer systems, mainly oriented to Drafting and Manufacturing. Tools for the computer aided engineering of moulds, able to support the operators in mould design, are available on the market but are not commonly used by SMEs because of cost and application difficulties.
By improving the diffusion of such products in SMEs, two important results will be obtained. Firstly, the costs of the software will decrease, and, secondly, the applicability of the software to SMEs will itself be improved, thanks to the broader field experience.
The project consisted of the definition of a methodology able to support SMEs from the relevant sectors in their approach to usage of computer aided engineering. The methodology allowed the pilot companies to select the best off-the-shelf mould flow software (this selection was based on the analysis and assessment of the real needs of each company); apply the software and train the employees; test the performances of the selected software integrated with their existing CAD system and in the actual industrial context; compare the obtained results with colleagues in Europe; and customise the software (if applicable).
Results concerning the positive and negative aspects of the application of the relevant technology, needs of end-users, required customisation, are available for other small and medium size companies. In this way SMEs may improve their competitiveness and their knowledge of the performance offered by software for Computer Aided Engineering. Moreover, a new market might emerge from the project, namely the market of simulation software tools addressed specifically to small mould maker and moulding companies.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali informatica e scienze dell'informazione software software applicativi software di simulazione
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Parole chiave
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
I-00173 Rome
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.