Objetivo
The aim of this project lies in the development and testing of an emissionfree heat pump for the provision of cold or heat for the air-conditioning of buildings (e.g. hotels, hospitals, shopping centres and public buildings). Principle characteristic of the process is absorption under low pressures. For cooling purposes, triple point conditions are set at which the three phases ice, water and steam coexist. An ice suspension is produced as a result which can be used for air-conditioning. In the case of heating, the pressure in the absorber is raised slightly and the absorption heat produced is used for heating.
The objective of the project lies in the compilation of design documents and analysis of the behaviour in operation of a plant on an experimental pilot scale with a refrigeration capacity of 40 kW and a heat flow of 50 kW in accordance with the principle of the process described. A COP of 6,5 in refrigeration mode (cooling water temperature of 25 C) will be achieved. Furthermore, the use of compact apparatus freezer, desorber) with integrated enhanced heat and mass transfer surfaces should be investigated in order to optimize investment costs. The technical objectives contain in particular:
- System integration possibilities for the Mediterranean area - Investigation of the capacity range (heating and cooling) for buildings - Development of a computer programme for the simulation of the entire process Analysis of permissible load and
part load behaviour
- Ice transport, ice separation and selection of suitable components (ice content, diameter, etc.) Absorption at low
pressures (6 mbar)
- Investigation of heat and mass transfer on enhanced surfaces for compact apparatus Evaporation and ice
formation on the droplets (retention time and droplet spectrum)
For cooling purposes, the process starts with introducing of feed water into a freezer in which triple point conditions prevail. The feed water is sprayed in the freezing chamber, whereby fine droplets are formed which already start to freeze in the airborne phase. An ice suspension is formed in the sump which is transported into a storage container. Refrigeration plants connected to this (e.g. air-conditioning units) are supplied with cold from this, for which both direct and indirect systems can be used. Since triple point conditions prevail in the freezer, steam forms as the droplets injected freeze which has to be permanently suctioned off in order to maintain the pressure. The suction process takes place with the aid of an absorption agent in an integrated absorber. The absorption heat is rejected by means of cooling water.
For heating purposes, the plant is switched over with simple groups of valves. Now the absorption heat is given up via the storage container to the airconditioning plant. In addition, the pressure in the freezer is raised slightly in order to achieve higher absorption temperatures. This is easily possible since the design is tailored for triple point conditions, i.e. for very low pressures and large vapour volumes.
The technical approach include the following categories:
- Investigation of air-conditioning systems for the integration of heat pumps - Compilation of properties for selected working mixtures
- Thermodynamic design of the process and kinetic calculation and modelling of the apparatus, analysis of compact
heat exchangers with structured surfaces
- Planning and construction of the plant Building, assembly and start up of the plant Implementation of trials
- Modelling and computer simulation
- Examination of different possible applications and economic feasibility
The process has the following advantages:
- Use of inorganic, non-toxic and non-volatile substances as working fluids in order to avoid environmental pollution
- Considerably lower energy demand in comparison to conventional refrigeration plants with the same volume of
investment.
- Large storage capacity of the refrigerant so that the cold can also be stored cheaply during the night
- No use of conventional refrigeration plants as auxiliaries - Combined heating and cooling operation
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería mecánica ingeniería termodinámica
- ciencias naturales ciencias de la tierra y ciencias ambientales conexas ciencias ambientales contaminación
- ciencias naturales matemáticas matemáticas aplicadas modelo matemático
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
27570 Bremerhaven
Alemania
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.