Cel
The aim of this project lies in the development and testing of an emissionfree heat pump for the provision of cold or heat for the air-conditioning of buildings (e.g. hotels, hospitals, shopping centres and public buildings). Principle characteristic of the process is absorption under low pressures. For cooling purposes, triple point conditions are set at which the three phases ice, water and steam coexist. An ice suspension is produced as a result which can be used for air-conditioning. In the case of heating, the pressure in the absorber is raised slightly and the absorption heat produced is used for heating.
The objective of the project lies in the compilation of design documents and analysis of the behaviour in operation of a plant on an experimental pilot scale with a refrigeration capacity of 40 kW and a heat flow of 50 kW in accordance with the principle of the process described. A COP of 6,5 in refrigeration mode (cooling water temperature of 25 C) will be achieved. Furthermore, the use of compact apparatus freezer, desorber) with integrated enhanced heat and mass transfer surfaces should be investigated in order to optimize investment costs. The technical objectives contain in particular:
- System integration possibilities for the Mediterranean area - Investigation of the capacity range (heating and cooling) for buildings - Development of a computer programme for the simulation of the entire process Analysis of permissible load and
part load behaviour
- Ice transport, ice separation and selection of suitable components (ice content, diameter, etc.) Absorption at low
pressures (6 mbar)
- Investigation of heat and mass transfer on enhanced surfaces for compact apparatus Evaporation and ice
formation on the droplets (retention time and droplet spectrum)
For cooling purposes, the process starts with introducing of feed water into a freezer in which triple point conditions prevail. The feed water is sprayed in the freezing chamber, whereby fine droplets are formed which already start to freeze in the airborne phase. An ice suspension is formed in the sump which is transported into a storage container. Refrigeration plants connected to this (e.g. air-conditioning units) are supplied with cold from this, for which both direct and indirect systems can be used. Since triple point conditions prevail in the freezer, steam forms as the droplets injected freeze which has to be permanently suctioned off in order to maintain the pressure. The suction process takes place with the aid of an absorption agent in an integrated absorber. The absorption heat is rejected by means of cooling water.
For heating purposes, the plant is switched over with simple groups of valves. Now the absorption heat is given up via the storage container to the airconditioning plant. In addition, the pressure in the freezer is raised slightly in order to achieve higher absorption temperatures. This is easily possible since the design is tailored for triple point conditions, i.e. for very low pressures and large vapour volumes.
The technical approach include the following categories:
- Investigation of air-conditioning systems for the integration of heat pumps - Compilation of properties for selected working mixtures
- Thermodynamic design of the process and kinetic calculation and modelling of the apparatus, analysis of compact
heat exchangers with structured surfaces
- Planning and construction of the plant Building, assembly and start up of the plant Implementation of trials
- Modelling and computer simulation
- Examination of different possible applications and economic feasibility
The process has the following advantages:
- Use of inorganic, non-toxic and non-volatile substances as working fluids in order to avoid environmental pollution
- Considerably lower energy demand in comparison to conventional refrigeration plants with the same volume of
investment.
- Large storage capacity of the refrigerant so that the cold can also be stored cheaply during the night
- No use of conventional refrigeration plants as auxiliaries - Combined heating and cooling operation
Dziedzina nauki (EuroSciVoc)
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
- inżynieria i technologia przemysł maszynowy inżynieria termodynamiczna
- nauki przyrodnicze nauki o Ziemi i pokrewne nauki o środowisku nauki o środowisku zanieczyszczenie
- nauki przyrodnicze matematyka matematyka stosowana model matematyczny
Aby użyć tej funkcji, musisz się zalogować lub zarejestrować
Program(-y)
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Temat(-y)
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenie do składania wniosków
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
Brak dostępnych danych
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
System finansowania
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Koordynator
27570 Bremerhaven
Niemcy
Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.