Obiettivo
PROJECT OBJECTIVES
The main objective of the project is to develop an innovative, reverse flow molten slag fixed bed gasifier concept for combined heat and power generation in a capacity range of 0.5-2.5 Mwe, and with improved thermal efficiency (5 - 10 %) compared to conventional fixed bed gasifiers. The reactor enables handling of relatively wet (up to 40 % mcdb) and ash-rich biomass fuels. The gasifier will produce a gas with a caloric value of at least 6 MJ/Nm3. Specific objectives are:
Development and testing of a low-cost device for enriching the oxygen content in air (air enrichment unit). An improvement of the energy efficiency of at least 0.1% per 1% point O2 enrichment is expected. The optimum oxygen content (30 - 60%) to be used in the gasifier depends on an economic and technical analysis of the whole process.
Development and testing of a novel and compact reverse-flow, molten slag, fixed bed gasifier with integrated heat exchange and tar removal system, for operation on oxygen-rich-air. A lab-scale unit (2 kg/hr) and a mini-plant (20 kg/hr) will be constructed and operated
Assessment of cost-effective technologies, both existing and under development, for utilisation of process heat from the reverse-flow slagging gasifier for drying biomass feedstock.
TECHNICAL APPROACH
In practice, several methods exist for increasing the oxygen content in air. Within this project pressure/vacuum swing adsorption and membrane separation will be studied in detail for application in biomass gasification systems. Final selection of the technology will be based on both an economic and a technical analysis. The selected technology will be built and tested on a pilot-scale.
The design of the reverse-flow gasifier will start with a literature study of slagging gasifiers. Concerning the design and operation of reverse flow reactors a lot of experience is available, and partly based on previous and running EC-projects (AIR2-CT93-1436 & JOR3-CT95-0053) for the removal of tar from producer gas in a reverse flow reactor. A small laboratory scale slagging gasifier will be designed and constructed which provide the required information for the pilot-plant installation. A pilot-plant with a capacity up to 20 kg of biomass per hour will be built, and subsequently connected with the selected air enrichment unit.
EXPECTED ACHIEVEMENTS AND EXPLOITATION
The novel, enriched-air blown fixed bed gasifier is operated in the molten slag mode. Due to extensive heat integration -which results from the reverse flow principle- this gasifier produces a tar-free, intermediate calorific gas of a low temperature. The main advantages of the proposed system are:
The gasifier will be operated with oxygen enriched air, which will cause higher reaction temperatures and enable operation in a slagging mode. This results in complete utilisation of the carbon. (no carbon remains in the ash).
Due to the use of oxygen enriched air, the fuel gas will have a higher heating value. This will lead to an increased mixture heating value of the gas/air mixture that is to be fed to the internal combustion engine and therefore enables the use of smaller (and cheaper) engines;
The reverse flow principle will lead to improved heat integration; a larger part of the biomass energy content is converted into chemical energy yielding a higher "biomass-to-electricity" efficiency.
The gasifier will have improved thermal and volumetric efficiency.
The different partners will either directly (through the manufacture of equipment or through implementation/exploitation of integrated energy systems) or indirectly (through exploitation of knowledge and experience) commercialise the results from the project.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria ambientale energia e carburanti energia da biomasse
- ingegneria e tecnologia ingegneria ambientale gestione basata sugli ecosistemi mitigazione dei cambiamenti climatici
- scienze umanistiche lingue e letteratura studi letterari
- ingegneria e tecnologia ingegneria chimica tecnologie di separazione
- scienze agricole biotecnologia agricola biomassa
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
7522 NB ENSCHEDE
Paesi Bassi
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.