Ziel
Objectives of the project
The objective of this project is to define the set of parameters which are of importance for site calibration and power curve identification in complex terrain as compared to the parameters important for in the case of the flat terrain. In this way it will contribute to the definition of a more accurate method for the determination or verification of the power curves of turbines situated in complex terrain and will contribute to the improvement of the economics of wind energy projects. The work will cover the cases of individual turbines.
Research approach and methodology
Two nominally identical stall regulated wind turbines which will be installed correspondingly in complex and flat terrain locations are chosen. Prior to the installation of the turbines, site calibration measurements are initiated at the corresponding locations using reference masts and temporary masts in the locations where the w/t will be erected . The general procedure is the same as described in the IEC document but the set of recorded parameters is much more comprehensive. The set of parameters recorded is the same for the two terrain types. After the end of the site calibration the temporary masts are removed, the two nominally identical turbines are installed and the power curve measurements commence. The recorded parameter set is the same for the two terrain types and more comprehensive than the one described in the IEC document. To investigate whether the parameters influencing the power curve are manufacturer-dependent (due to differences in the control system, the drive train or the rotor), the above steps are repeated for one more stall regulated turbine and for a wind turbine of different concept (variable speed, pitch regulated).
To confirm that the results from the measurement campaigns do not depend on the anemometers used, the response of the types of the cup anemometers used in the project are inter-compared under flat and complex terrain conditions. Commonly accepted installation and measurement procedures are agreed for all the measurement campaigns of the project to ensure results that can be compared.
Expected achievements and exploitation
The proposed work is important to the manufacturers, the power plant developers, the financial institutions and the end users. This is justified from the expected results which will contribute to the removal of a considerable part of the uncertainty associated with the production of wind turbine in complex terrain. This uncertainty is the major obstacle for the financing of many wind energy projects simply because the financial institutions do not wish to get involved to potentially high risk investments. Assuming a "worst-case scenario", the big uncertainty becomes an obstacle since the expected profit becomes marginal and the risk for losses substantial. For the manufacturers which must warranty an annual energy production the lack of objective ways to measure or predict the expected power curve in complex terrain can lead to losses or disputes with the wind plant owner. Finally for the potential investor lower uncertainty makes the investment both cheaper and easier to sell further.
The following results will be available for exploitation:
A recommendation of a practicable methodology to replace the existing one for the use in complex terrain
The use of the results for the adoption of an international standard A method for site calibration of immediate use by the wind turbine industry or the windfarm developers
A method for the verification of the power curve by using the nacelle cup anemometer
The results will be readily accessible by the whole of the wind turbine industry. The project results are expected to increase the competitiveness of the wind turbines as they offer better contractual terms due to lesser uncertainty in the investment.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Steuerungssysteme
- Sozialwissenschaften Wirtschaftswissenschaften Wirtschaftswissenschaft
- Technik und Technologie Umwelttechnik Energie und Kraftstoffe erneuerbare Energie Windenergie
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
4000 ROSKILDE
Dänemark
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.