Obiettivo
1. Objectives
1. To improve the understanding of the stall mechanisms involved on a large stall regulated wind turbine rotor by a novel technique for visualising boundary layer separation with and without vortex generators.
2. To improve the understanding of the dynamic and structural behaviour of large wood epoxy blades by comparing monitored loads with predictions.
3. To improve the performance of the blades through systematic flow enhancement (from 1 and 2)
4. To investigate in-plane vibrations which can be design-drivers on large stall-regulated blades and to design and test means for reducing them
5. To reduce the mass and therefore the cost of these blades (from 2 and 4)
2. Technical Approach
A NEG-Micon 1.5MW wind turbine with a 64m diameter rotor with wood-epoxy fixed pitch stall regulated blades will be used for the research and trial of performance enhancing devices. The turbine is on a test site which is already well instrumented and characterised for wind conditions.
The project relies on three research techniques:
- Direct structural measurements on the instrumented rotor
- Flow visualisation on a full scale rotor using novel stall flags developed by one of the partners to allow a much more detailed map of instantaneous flows to be built up
- Computer simulations on aerodynamic software developed by another partner for simulation of blade dynamics.
The results will enable particular flow conditions and aerodynamic features to be linked with global rotor performance namely power and loads.
Performance enhancement will include:
- Vortex generators are usually in the form of a row of small upstanding barriers applied to the leeward side of the blade near the leading edge. These delay stall and produce greater lift which improves the medium wind energy capture.
- Add on damping devices to reduce edgewise vibrations particularly at higher wind speeds.
3. Expected achievements
- Detailed predictions and measurements will be made of the behaviour of a 64m 1.5 MW machine equipped with wood epoxy blades.
- The energy capture of the 1.5 MW machine will be increased by between 3 and 4% at a 7.5 m/s site as a result of a better understanding of the flow behaviour, and in particular, the stall.
- Devices will be designed, manufactured and tested which will reduce the lead-lag vibrations
experienced by some large scale stall regulated machines by up to 20%. - The cost of the 31 m blades used on the 1.5 MW machine will be reduced by up to 5% through an improvement in the load specification, the use of the vibration reducers and the resultant reduction in material.
- Based on the combination of these two results, a new blade will be designed using a better
understanding of stall behaviour which should result in the reduction of energy costs by about 4%.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali informatica e scienze dell'informazione software
- ingegneria e tecnologia ingegneria ambientale energia e carburanti energia rinnovabile energia eolica
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria aerospaziale ingegneria aeronautica
- scienze agricole agricoltura, silvicoltura e pesca silvicoltura
- scienze naturali matematica matematica applicata modello matematico
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
SO40 3SA Totton
Regno Unito
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.