Objectif
The aim of this study is to increase the performance of wind turbines and reduce costs by developing blades of advanced design.
The expected results are the following :
To demonstrate that advanced structural design can be incorporated into blades with advanced airfoil shape '("structural design").
To show that advanced manufacturing methods can be used to fabricate spar/shell blades of advanced design ("manufacturing methods").
To show that alternative wood and resin types can be used to improve the performance and reduce the cost of blades made of wood
("wood-composites").
To demonstrate that glass-epoxy composites can be used to develop large wind turbine blades ("glass-epoxy composites").
To validate and verify design rules and recommendations for standards by calculation and testing ("norms and standards").
Results from the fatigue testing of the materials have enabled 'stiffness-controlled fatigue curves' for glass fibre composites and glass/carbon fibre composites to be established, allowing designers to make better choices between materials. Results of component testing showed that degradation was difficult to detect in the studs and blade, until the loads became much higher than the design loads.
Results from the blade tests were used to improve the earlier prototype blade, whilst the blade root review showed the most cost-effective construction to be the 'post-bonding' stud concept. Finally, the project proposed a methodology to allow turbine manufacturers to conform with the EU machinery directive and label turbines with the CE mark.
Recent advances in our knowledge of materials, structural response to load, aerodynamics and manufacturing techniques will be utilised combined with the necessary supporting research. The results of the project will permit the verification of the design, manufacture, performance and replication of the principal advanced blade types. Each type is related to projects for full-size turbines. A subsidiary aim is to develop recommendations concerning design rules and norms. The work will be performed by institutes and blade manufacturers to make the best use of expertise, manufacturing and test facilities.
The situation in Europe is the following :
Materials : There now exists an expanded understanding of the response of materials to fluctuating loads incorporating both a larger set of data and a wider spectrum of materials, developed with the aid of JOULE I funding.
Design : blade manufacturers have improved their design capability both by recruiting staff and the development of know-how. Aerodynamic design has advanced in Europe through work carried out by two of the partners on low lift profiles and profiles with good stall characteristics. Manufacture : New materials have been incorporated as they have become available - though they have not yet been fully characterized; process techniques have concentrated on improving quality.
Testing : Existing methods have been developed to permit the extensive testing of coupons, spars and blades and the monitoring of damage accumulation. Non-destructive evaluation shows promise of being able to monitor the state of the blade during testing.
The expected results are the following :
To demonstrate that advanced structural design can be incorporated into blades with advanced airfoil shape ("structural design").
To show that advanced manufacturing methods can be used to fabricate spar/shell blades of advanced design ("manufacturing methods").
To show that alternative wood and resin types can be used to improve the performance and reduce the cost of blades made of wood ("wood-composites").
To demonstrate that glass-epoxy composites can be used to develop large wind turbine blades ("glass-epoxy composites").
To validate and verify design rules and recommendations for standards by calculation and testing ("norms and standards").
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie ingénierie des materiaux composites
- ingénierie et technologie génie de l'environnement énergie et combustibles énergie renouvelable énergie éolienne
- ingénierie et technologie ingénierie des materiaux solides amorphes
- ingénierie et technologie génie mécanique génie automobile génie aérospatial ingénierie aéronautique
- sciences agricoles agriculture, sylviculture et pêche sylviculture
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
ROSKILDE
Danemark
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.