Obiettivo
The aim of this study is to increase the performance of wind turbines and reduce costs by developing blades of advanced design.
The expected results are the following :
To demonstrate that advanced structural design can be incorporated into blades with advanced airfoil shape '("structural design").
To show that advanced manufacturing methods can be used to fabricate spar/shell blades of advanced design ("manufacturing methods").
To show that alternative wood and resin types can be used to improve the performance and reduce the cost of blades made of wood
("wood-composites").
To demonstrate that glass-epoxy composites can be used to develop large wind turbine blades ("glass-epoxy composites").
To validate and verify design rules and recommendations for standards by calculation and testing ("norms and standards").
Results from the fatigue testing of the materials have enabled 'stiffness-controlled fatigue curves' for glass fibre composites and glass/carbon fibre composites to be established, allowing designers to make better choices between materials. Results of component testing showed that degradation was difficult to detect in the studs and blade, until the loads became much higher than the design loads.
Results from the blade tests were used to improve the earlier prototype blade, whilst the blade root review showed the most cost-effective construction to be the 'post-bonding' stud concept. Finally, the project proposed a methodology to allow turbine manufacturers to conform with the EU machinery directive and label turbines with the CE mark.
Recent advances in our knowledge of materials, structural response to load, aerodynamics and manufacturing techniques will be utilised combined with the necessary supporting research. The results of the project will permit the verification of the design, manufacture, performance and replication of the principal advanced blade types. Each type is related to projects for full-size turbines. A subsidiary aim is to develop recommendations concerning design rules and norms. The work will be performed by institutes and blade manufacturers to make the best use of expertise, manufacturing and test facilities.
The situation in Europe is the following :
Materials : There now exists an expanded understanding of the response of materials to fluctuating loads incorporating both a larger set of data and a wider spectrum of materials, developed with the aid of JOULE I funding.
Design : blade manufacturers have improved their design capability both by recruiting staff and the development of know-how. Aerodynamic design has advanced in Europe through work carried out by two of the partners on low lift profiles and profiles with good stall characteristics. Manufacture : New materials have been incorporated as they have become available - though they have not yet been fully characterized; process techniques have concentrated on improving quality.
Testing : Existing methods have been developed to permit the extensive testing of coupons, spars and blades and the monitoring of damage accumulation. Non-destructive evaluation shows promise of being able to monitor the state of the blade during testing.
The expected results are the following :
To demonstrate that advanced structural design can be incorporated into blades with advanced airfoil shape ("structural design").
To show that advanced manufacturing methods can be used to fabricate spar/shell blades of advanced design ("manufacturing methods").
To show that alternative wood and resin types can be used to improve the performance and reduce the cost of blades made of wood ("wood-composites").
To demonstrate that glass-epoxy composites can be used to develop large wind turbine blades ("glass-epoxy composites").
To validate and verify design rules and recommendations for standards by calculation and testing ("norms and standards").
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria dei materiali compositi
- ingegneria e tecnologia ingegneria ambientale energia e carburanti energia rinnovabile energia eolica
- ingegneria e tecnologia ingegneria dei materiali solidi amorfi
- ingegneria e tecnologia ingegneria meccanica ingegneria dei veicoli ingegneria aerospaziale ingegneria aeronautica
- scienze agricole agricoltura, silvicoltura e pesca silvicoltura
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
ROSKILDE
Danimarca
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.