Dynamic inflow: yawed conditions and partial span pitch control

Informazioni relative al progetto

ID dell’accordo di sovvenzione: JOU20186

Progetto chiuso

Data di avvio 1 Dicembre 1992

Data di completamento 30 Aprile 1995

Finanziato da

• Specific research and technological development programme (EEC) in the field of non-nuclear energy, 1990-1994

Costo totale

Nessun dato

Contributo UE

Nessun dato

Coordinato da

ENERGY RESEARCH CENTRE OF THE NETHERLANDS
Netherlands

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati sfruttabili

Dynamic inflow: yawed conditions and partial span pitch control

Wind turbine designers require reliable tools to assist in the development of efficient, safe, reliable wind turbines. The engineering model developed under this project provides a useful tool for the determination of time varying (fatigue) loads under specified wind conditions. The previous JOULE project, "Dynamic Inflow" (JOUR-0083) carried out by the same group of partners, derived models to describe dynamic inflow in wind turbine rotors, i.e., the instationarities and non-uniformities of the inflow velocities in the rotorplane. This project is a natural follow-on from this work and its aim is to validate engineering methods for dynamic inflow as applied to yawed misalignment conditions and partial span pitch transients. It is aimed at extending the previous work in three ways. Firstly it aims to further validate the existing models on machines of intermediate size, secondly, further develop and validate pitching transient; and finally, develop a dynamic inflow model for partial span pitch situations. These models were designed to replace the standard blade element momentum modelling currently used in the aero-elastic codes for the determination of instationary profile aerodynamics modules. The final expected result was, therefore, a validated second generation of aerodynamic models to be used in the aerodynamic design codes used by turbine designers and analysts. As all instationary phenomena will then be included, the wind turbine designer will be equipped with a more reliable tool for the determination of time varying loads under specified wind conditions.