Objetivo
The project requires both experimental and theoretical studies of a furnace
configuration and a high temperature filtration system. Work will therefore be carried out in the three related areas of furnace modelling, fouling of furnace surfaces and fouling of filters.
To improve the accuracy of the calculations for heat release and fouling within a furnace and the heat available at the furnace exit, two new aspects must be added to existing modelling approaches. The furnace studies
calculations will be undertaken using a general model for the bulk flow, based on computational fluid dynamics (CFD) codes, and another model optimised for the wall region. The latter will be based on the "absence of turbulence model" using a Direct Numerical Simulation (DNS) approach which eliminates the need for nonuniversal "wall functions". New models to predict deposition rates for furnace walls and high temperature filters will be developed. These will be derived from theoretical and analytic studies in combination with experimental and CFD exercises to provide the necessary data and parameters for industrial plant. Methods will be developed based on scaling laws of multifractal geometry and appropriate Newtonian approximations, to provide calculations of properties of deposits for furnaces and high temperature filters. Conventional Newtonian methods often produce inadequate approximations and are very computer intensive in time, but the properties are required for the heat transfer and other calculations.
For the combustion chamber fouling section of the project, the results will be validated by direct comparison with operating industrial plant data obtained as part of the project. A similar validation will be carried out for the filter studies, again using data obtained from industrial plant.
The project requires both experimental and theoretical studies f a furnace configuration and a high temperature filtration ystem. Work will therefore be carried out in the three related areas of furnace modelling, fouling of furnace surfaces and ouling of filters. To improve the accuracy of the calculations for heat release and ouling within a furnace and the heat available at the furnace exit, two new aspects must be added to existing modelling approaches.
The furnace studies calculations will be undertaken sing a general model for the bulk flow, based on computational luid dynamics (CFD) codes, and another model optimised for the all region. The latter will be based on the "absence of urbulence model" using a Direct Numerical Simulation (DNS) pproach which eliminates the need for non
models to predict deposition rates for furnace walls and high emperature filters will be developed. These will be derived from heoretical and analytic studies in combination with experimental nd CFD exercises to provide the necessary data and parameters or industrial plant. Methods will be developed based on scaling laws of multi
appropriate Newtonian approximations, to provide alculations of properties of deposits for furnaces and high emperature filters. Conventional Newtonian methods often produce nadequate approximations and are very computer intensive in ime, but the properties are required for the heat transfer and ther calculations.For the combustion chamber fouling section of the project, the esults will be validated by direct comparison with operating ndustrial plant data obtained as part of the project. A similar alidation will be carried out for the filter studies, again sing data obtained from industrial plant.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias físicas mecánica clásica mecánica de fluidos dinámica de fluidos dinámica de fluidos computacional
- ciencias naturales matemáticas matemáticas puras geometría
- ciencias sociales derecho
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
G15 0QR Glasgow
Reino Unido
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.