Ziel
The project requires both experimental and theoretical studies of a furnace
configuration and a high temperature filtration system. Work will therefore be carried out in the three related areas of furnace modelling, fouling of furnace surfaces and fouling of filters.
To improve the accuracy of the calculations for heat release and fouling within a furnace and the heat available at the furnace exit, two new aspects must be added to existing modelling approaches. The furnace studies
calculations will be undertaken using a general model for the bulk flow, based on computational fluid dynamics (CFD) codes, and another model optimised for the wall region. The latter will be based on the "absence of turbulence model" using a Direct Numerical Simulation (DNS) approach which eliminates the need for nonuniversal "wall functions". New models to predict deposition rates for furnace walls and high temperature filters will be developed. These will be derived from theoretical and analytic studies in combination with experimental and CFD exercises to provide the necessary data and parameters for industrial plant. Methods will be developed based on scaling laws of multifractal geometry and appropriate Newtonian approximations, to provide calculations of properties of deposits for furnaces and high temperature filters. Conventional Newtonian methods often produce inadequate approximations and are very computer intensive in time, but the properties are required for the heat transfer and other calculations.
For the combustion chamber fouling section of the project, the results will be validated by direct comparison with operating industrial plant data obtained as part of the project. A similar validation will be carried out for the filter studies, again using data obtained from industrial plant.
The project requires both experimental and theoretical studies f a furnace configuration and a high temperature filtration ystem. Work will therefore be carried out in the three related areas of furnace modelling, fouling of furnace surfaces and ouling of filters. To improve the accuracy of the calculations for heat release and ouling within a furnace and the heat available at the furnace exit, two new aspects must be added to existing modelling approaches.
The furnace studies calculations will be undertaken sing a general model for the bulk flow, based on computational luid dynamics (CFD) codes, and another model optimised for the all region. The latter will be based on the "absence of urbulence model" using a Direct Numerical Simulation (DNS) pproach which eliminates the need for non
models to predict deposition rates for furnace walls and high emperature filters will be developed. These will be derived from heoretical and analytic studies in combination with experimental nd CFD exercises to provide the necessary data and parameters or industrial plant. Methods will be developed based on scaling laws of multi
appropriate Newtonian approximations, to provide alculations of properties of deposits for furnaces and high emperature filters. Conventional Newtonian methods often produce nadequate approximations and are very computer intensive in ime, but the properties are required for the heat transfer and ther calculations.For the combustion chamber fouling section of the project, the esults will be validated by direct comparison with operating ndustrial plant data obtained as part of the project. A similar alidation will be carried out for the filter studies, again sing data obtained from industrial plant.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Naturwissenschaften klassische Mechanik Strömungsmechanik Fluiddynamik numerische Strömungsmechanik
- Naturwissenschaften Mathematik reine Mathematik Geometrie
- Sozialwissenschaften Rechtswissenschaften
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
G15 0QR Glasgow
Vereinigtes Königreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.