Obiettivo
To improve the performance of shell and tube heat exchangers by: investigating different baffle arrangements which could give a close approach to counterflow whilst achieving enhancement of heat transfer; comparing different alternative types with conventional baffle arrangements; increasing the tube-side heat transfer coefficient.
Research was carried out in order to improve the performance of shell and tube heat exchangers by:
investigating different baffle arrangements which could give a close approach to counterflow whilst achieving enhancement of heat transfer;
comparing different alternative types with conventional baffle arrangements;
increasing the tube-side heat transfer coefficient.
Comparative information was collected on the performance of segmental, disc and doughnut, rod and grid baffle arrangements and also on available augmentation techniques for shell side and tube side flows. Industrial applications were reviewed.
Numerical and local calculations for rod, grid and alternative baffle systems were carried out together with global calculations of flow and heat transfer in real heat exchangers.
To date the work has shown that the use of twisted tapes on the shell side of heat exchanger can give lower are requirements than both rod and grid baffles. The rod system was found to be marginally better that the grid system over the operating range investigated.
The heat exchanger market for EC countries has been estimated to approach 1.6 billion ECU/year in the late 1980s and early 1990s and about half of this market is of the shell-and-tube type. The energy efficiency of this heat exchanger type is therefore an important factor in achieving energy savings in industry. This coordinated project aims at studying shell and tube heat exchangers in the following ways.
Comparative information were collected on the performance of segmental, disc and doughnut, rod and grid baffle arrangements and also on available augmentation techniques for shell-side and tube-side flows. Industrial applications were reviewed (NEL, GRETh, CRES, ICI and COVRAD).
Numerical and local calculations for rod, grid and alternative baffle systems were carried out together with global calculations of flow and heat transfer in real heat exchangers; for this purpose the CFD code TRIO-VF were used (CRES, GRETh). The results of the calculations were compared with experimental data (GRETh, NEL). The heat transfer and pressure drop of rod and grid baffle systems will then be measured together with the performance of rod and grid baffled heat exchangers (NEL, GRETh, COVRAD). The field of novel "baffle" designs giving higher heat transfer performance with acceptable pressure drop will also be explored (NEL). With the most promising of these new concepts, full size heat exchangers were constructed and tested (NEL, GRETh, COVRAD); resulting data will also be used to validate the TRIO-VF code (GRETh). The possibilities for tube side enhancement were explored by NEL.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria ambientale gestione basata sugli ecosistemi mitigazione dei cambiamenti climatici
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
G75 0QU East Kilbride
Regno Unito
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.