Ziel
Clarify the interactions between knocking combustion and the combustion chamber walls; mechanisms for wall erosion by knock will be derived. Thus a quantitative basis will be developed for improved design of combustion chambers of S.I. engines which are less sensitive to knock and which exhibit a wider tolerance for varying fuel qualities (e.g. for alternative less polluting fuels).
In a first phase the required experimental facilities and diagnostic techniques have been installed and developed: these included 4 optical research engines at 4 different sites, a knock damage simulator, 2 rapid compression machines, a high pressure/temperature chemical flow reactor, a novel LIF technique for identification of formaldehyde, ultra high speed schlieren photography (up to 2 million fps), ultra fast surface temperature measurement, a modeless CARS system and a particle tracking technique.
Effective simultaneous experimental and theoretical work was established as the basis for improved understanding of the physical and reaction chemical process of knock initiation, propagation and knock induced gas/surface interactions. Improved detailed reaction kinetic mechanism and a global autoignition scheme have been generated. Based on these results computer simulation programs have been adapted and developed for: a 3D engine cycle simulation, a 1D reactive flow modelling using detailed chemistry, a 2D reactive flow in-cylinder pressure wave interaction model and a detailed 3D model for simulating reactive crevice flow and boundary layer interactions as well as the associated wall surface loading. The codes provided valuable numerical results.
Based on the concept of exothermic centres a unified theory of knock has been developed which gives now for the first time a consistent explanation of all physical and chemical observations. Knock is initiated by autoignition at localized 'exothermic centres', which may arise due to appreciable temperature and/or compositional inhomogeneities. The severity of knock is controlled by the mode of reactive gas dynamic coupling, which itself is determined by the thermochemical state of the end-gas, especially the rate of energy release, the degree of end-gas inhomogeneity and particularly the exothermic centre interactions by pressure waves. Under critical conditions this leads to a developing detonative combustion. Also, for this most severe mode of knock, the mechanisms of the relevant interactions between flow and wall surfaces causing excessive material loading and erosive knock damage have been clarified by well defined theoretical and experimental investigations.
The results allow now a full understanding of the knocking process and form a solid basis for later derivation of measures to avoid knock. For practical improvement of modern engines, such analysis has to go along with specific engine design features. Some generally valid conclusions to extend the knock limit of SI engines have already been derived.
Work in this project will be divided as follows:
DB will build a knock simulator and a standardized optically accessible single cylinder engine for use with an ultra fast Schlieren visualization technique. Similar single cylinder engines will be modified for test studies of flow field diagnostics (University Leeds) and double pulse laser induced fluorescence techniques (University Stuttgart). SHELL, Thornton will study knock with a Hydra single cylinder engine using laser sheet techniques. The University of Trondheim will test and select a suitable engine combustion code from existing programmes (SALES, KIVA) in which reaction kinetics of the University of Stuttgart will be incorporated. The University of Lille, France will set up a rapid compression machine and a well stirred reactor to determine reaction rates of higher hydrocarbons which are needed for realistic modelling of knocking combustion.
The group will carry out the main tasks of this project by applying all experimental, diagnostics, theoretical and numerical tools in a systematic analysis of gas phase reactions and interactions with the combustion chamber walls. Operating conditions and details of research topics will be chosen for all participants after careful selection of relevant processes and full agreement in the working group. This will allow for an optimum coordination of work at the various laboratories.
A continuous evaluation process will be maintained throughout the second half of the project in order to come to a consistent and complete analysis of the results and a data base which is as complete as possible. The early start of evaluation will also aid to promote development and improvement of computer codes. This task will be carried out by all members of the working group.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Chemiewissenschaften organische Chemie Aldehyde
- Naturwissenschaften Chemiewissenschaften organische Chemie Kohlenwasserstoff
- Technik und Technologie Umwelttechnik Energie und Kraftstoffe
- Naturwissenschaften Naturwissenschaften Optik Laserphysik
- Naturwissenschaften Mathematik angewandte Mathematik mathematisches Modell
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
70567 Stuttgart
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.