Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-04-16

European Pilot Plant Study

Ziel

The aim of the study is to investigate the location and design of a medium scale (0.5 to 1 MW) shoreline oscillating-water-column (OWC) pilot plant for wave energy conversion. In particular, the pilot plant is intended to serve as a European platform for research into aspects of wave energy devices at practical scale, namely in problems associated with constructional methods, air turbines, primary control systems, grid interactions, etc.
A study was made of the use and limitations of frequency and time domain approaches in modelling oscillating water column (OWC) devices. The existing gap between knowledge on device hydrodynamics, power equipment and wave resource and the procedures which apparently were followed in the design of existing OWC prototypes was also examined. Furthermore, a statistical approach to the overall design of OWC power plants was developed which highlights the relevance of wave to wave statistics. The use of by pass valves in parallel with the turbine was examined and particular attention was given to the problem of estimating short term energy storage requirements, in order to smooth out electricity production in wave groups and periods of calmness.

An experimental investigation was made of the aerodynamic performance of a high solidity Wells turbine for a wave power plant. A monoplane turbine of 0.6 m rotor diameter with guide vanes was built and tested. The tests were conducted in unidirectional steady air flow. Measurements taken include flow rate, pressure drop, torque and rotational speed, as well as velocity and pressure distributions.

A remarkable difference was found in flow rate coefficient prior to stalling for 2 similar rotors having slightly different blade profiles. This indicates that a judicious choice of the blade profile, using accurate modelling of the viscous flow around the turbine blades (90 degree stagger angle cascades), is required to enlarge the range of flow rates for which the turbine can perform with good efficiency).

Kinetic energy losses measured at the turbine exit are substantially smaller than viscous losses at the rotor. However, the use of guide vanes to remove flow swirl at the exit can result in a considerable improvement in efficiency, which, for the constant thickness NACA 0015 rotor considered in the study was found to attain 17.1%.

The results indicated that the use of stator blades produced a nonnegligible reduction of the value in the ratio of flow rates, which means a less extended range of flow rates for which the turbine performs efficiently.

Research has been carried out concerning the selection of a site and the preliminary design for medium scale shoreline oscillating water column pilot plant to serve as a European platform for research into aspects of wave energy devices at practical scale.

One site on Islay and one on Pico have been proposed for the construction of 2 European Pilot Plants. The plant on Islay will demonstrate the 'designer gully' method of construction in which the water column structure is built in a man made recess in an otherwise straight length of coastline. The plant on Pico will utilize a natural rock gully and will demonstrate a more advanced form of the construction techniques used in small plant built on Islay in 1988.

If shoreline wave energy is to have wider applications in the European Community and worldwide. It will be necessary to develop modular systems which can possibly be transported to site in sections or even prefabricated close to the site, but beyond the splash zone, even in storm conditions.

It will also be necessary to standardize the design of components in the Wells turbine generator module so that machines can be readily assembled to suit a range of pneumatic wave power devices.
To avoid the development of site specific designs it would be better not to select a single site for the demonstration plant. The plant should also form part of an overall programme of work including a large element of fundamental generic research.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Daten nicht verfügbar

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

CSC - Cost-sharing contracts

Koordinator

INSTITUTO SUPERIOR TECNICO
EU-Beitrag
Keine Daten
Adresse
Avenida Rovisco Pais, Pav. Mecanica 1-2°
1049-001 LISBOA
Portugal

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (1)

Mein Booklet 0 0