Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2022-12-27

PRODUCTION OF HYDROGEN FOR THE HYDROGENATION OF HEAVY OIL AND COAL [PLANT ASSEMBLY PHASE]

Ziel

To erect a demonstration gasifier including the metering and monitoring devices.L%
A preplanning phase served to investigate different concepts with respect to process flow, the technical design of the main parts and the integration of the demonstration plant into the RUHR OEL refinery in Gelsenkirchen-Scholven.
For two process variants the basic engineering was carried out for the main process steps; a pre-basic was worked out for the conventional units of the plant, i. e. grinding, crude gas shift conversion and H2S/CO2 scrubbing.
Detailed documents including construction drawings were produced for the main parts e. g. the extruder feeding-system, the burner and the gasification reactor.
In order to determine whether the gasification plant would qualify for approval by the authorities a preliminary application in accordance with P9 of the Federal Environmental Protection (Immission) Act was prepared and submitted. After a thorough examination of the application and a discussion on the objections the preliminary approval was guaranted.
To conclude the investigations, the investment cost were determined and the economic viability was examined for both process alternatives.
The investigations have shown that a large-scale plant for the gasification of hydrogenation residues and coal is technically feasible and does quality for approval. The low energy price level does for the time being, however, not permit a cost-covering operation of coal gasification or coal hydrogenation plants. Measures are, therefore, examined to improve the economic viability of gasification and hydrogenation units. The use of solid or liquid wastes (as e. g. sewage sludge, used plastic materials, used oils) is considered to form a large economic potential. Under the aspect of a CO2-neutral replacement of fossil sources of energy, renewable raw-materials and the use of biomass may in the medium and long term also constitute an alternative.
The pilot plant tests have shown that the extruder is available as universal system for the feeding of solid fuels into pressure vessels. In addition to the entrained-flow gasification of coke and coal examined here, the extruder has further potential fields of application, viz. :
- Gasification and combustion of solid fuels in a pressurized fluidized bed
- Pressure hydrogenation of used plastic materials and
- Supercritical extraction of biomass.
The project started in 1981 with the design of the plant, the obtaining of the approval, the basic - and detail - engineering and the acquisition of the necessary material and equipment.
The current phase includes the erection of the gasifier.
The gasifier of the demonstration plant is designed to produce 40. 000 m3/h synthesis gas. This corresponds to a feed rate of 16 t /h. The gasifiecation pressure is 60 bars. The dustfree raw gas from the demonstration plant is directed to the raw gas shift conversion, H2S/CO2 - removal and pressure swing adsorption units.
The safe feeding operation of liquid hydrogenation residues is isured by special suspension pumps. The dosage of the LTC coke and the hard coal will be carried out employing the extruder feeding system for solid fuels developed by VEBA OEL on pilot plant scale. The main component of the feeding system is a twin screw extruder. In the feeder the finely ground coal or coke are mixed intensively with about 15% water or oil andpressurized to form a gas-tight plug. At the extruder outlet the pressurized feed-stock is pulverised in a specifically designed discharge head and transferred by steam via a specially designed burner into the gasification reactor.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

DEM - Demonstration contracts

Koordinator

Veba Oel AG
EU-Beitrag
Keine Daten
Adresse
Alexander-von-Humboldt-Straße
45896 Gelsenkirchen
Deutschland

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten
Mein Booklet 0 0