Obiettivo
1 Development and optimization of new wear-resistant PVD coatings on differnet types of HSS tools. 2 Optimization double treatment of plasma nitriding and PVD process. 3 Development of an industrial low temperature CVD process for WC CVD equipment. 4 Jobshop comparisons between different coated HSS tools. 5 Application trials and jobshop comparisons between different coated hot-working steel tools. achievements to date Objectives 1-2: A Choice, characterization and classification of different new PVD mono and multilayer coatings. Objective 4: B Developing and setting-up of different machinability laboratory tests for the following tools: a) HSS Drills; b) HSS Form tools; c) HSS End mills. Objective 3: C Design and construction of a hot-wall CVD reactor. D Delivery, assembly and testing of CVD reactor. E W2C coating procedure for secondary security provisions.
The achievements of the research so far are:
choice, setting up and optimisation of different new physical vapour deposition (PVD) coatings;
developing and setting up of different machinability tests, optimisation of the machining cycle parameters for the different coated tools, setting up and organisation of different coated tools tested;
design and construction of a hot wall chemical vapour deposition (CVD) reactor W2C coating, optimisation of process parameters, secondary security provisions;
realisation and characterisation of different hot working steel tools, setting up and organisation of different application trials.
The aims of the project were to develop new monolayer and multilayer coatings with an industrial physical vapour deposition (PVD) process and to develop a chemical vapour deposition (CVD) process based on the already known tungsten carbide coatings. This latter process should have the following characteristics: uniform coating thickness, maximum operating temperature of 500 C, smooth surface coating, strong bonding between substrate and coating and be an environmentally clean process.
Titanium aluminium nitride and titanium hafnium nitride coatings have been developed and compared with standard titanium nitride coatings on drills, form tools and end mills. The titanium aluminium nitride is very good for drill tools and form tools but only at very high speed. The titanium hafnium nitride coating is better than the standard titanium nitride coating only for end mills.
Tungsten carbide layers have been made on a development scale at coating temperatures of less than 500 C. Great care is required over the control of the carbon source. Nickel (phosphide based) was found to be the most satisfactory interlayer to promote adhesion between steel and the tungsten carbide coating.
AN INITIAL OBJECTIVE OF THE PROJECT IS THE STUDY AND DEVELOPMENT OF NEW SINGLE AND MULTILAYER WEAR-RESISTANT COATING MATERIALS FOR SUBSTRATES OF HSS USING AN INDUSTRIAL PVD PROCESS. IN PARTICULAR NEW COATINGS WILL BE STUDIED FOR USE IN SPECIFIC APPLICATIONS AND WITH BETTER PERFORMANCE THAN STANDARD TIN COATINGS. THE COATINGS WILL BE PRODUCED WITH "PVD ARC EVAPORATION REACTIVE ION PLATING" RESEARCH EQUIPMENT, INITIALLY ON SAMPLES AND TOOLS MADE WITH DIFFERENT HSS MATERIALS (M2, M35, ASP30, ETC...)
THE AIM IS TO REALISE AND OPTIMIZE THE QUALITY OF THE LAYERS BY THE DOUBLE TREATMENT OF PLASMA NITRIDING AND PVD PROCESS ON DIFFERNENT HSS TOOLS.
THE COATING QUALITY WILL BE EXAMINED WITH LABORATORY QUALITY CONTROL AND THE COATINGS PRODUCED WILL BE OPTIMIZED WITH DIFFERENT MACHINABILITY TESTS ON DIFFERENT NEW COATINGS CLASSIFIED IN ACCORDANCE WITH THE MEASURED CHARACTERISTICS, AND THE OPTIMIZATION OF THE RESPECTIVE COATING CYCLES ON DIFFERENT HSS TOOLS.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze chimiche chimica inorganica composti inorganici
- scienze naturali scienze chimiche chimica inorganica metalli di transizione
- ingegneria e tecnologia ingegneria meccanica ingegnerizzazione dei prodotti produzione sottrattiva
- scienze naturali scienze chimiche chimica inorganica metalli di post-transizione
- ingegneria e tecnologia ingegneria dei materiali rivestimenti e pellicole
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
10043 Orbassano Torino
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.