Ziel
The overall objective of the project is to assess the quality of the sawn timber products based on parameters (site class and silvicultural treatment) to be measured on the standing trees, and to investigate the relation between silvicultural practices and wood quality.
The objectives of the project was mainly to assess the quality of the sawn timber products (average and distribution) coming frompopulations of trees for which the following usual measurements are available: total height; diameter at breast height; age. Three species were considered: Norway Spruce Sitka Spruce and Douglas fir. Most complete results were acheived on Norway spruce.
In this project, wood quality was mainly judged by the following criteria: position, size and type of knots, ring width, wood density and grain angle distribution in the plank. The project can be grouped into 3 distinct categories: establishing models which relate usual tree descriptions and internal structure of the corresponding trees; feeding an existing software (to improve) with such models, the simulation of various visual grading rules and wood density, and validation of the software; technological characteristics of products obtained from stands in which silvicultural treatment was known. Sampled trees total 300 from 40 stands. Twelve teams from eight countries were involved in the project (Belgium, Germany, Denmark, France, Italy, Ireland, Sweden and United Kingdom).
The project will be focused on three species of major importance for the European wood industries: Norway spruce (Picea abies), Sitka spruce (Picea sitchensis) and Douglas fir (Pseudotsuga douglasii).
In order to reach the objective, a central point of the project will be to establish quantitative models for the interpretation of the effects of silvicultural practices on wood quality.
The established models will be included in software (called SIMQUA). Improvement of the software and the input of statistical and biological relationships which provide intensive descriptions of the tree constitute an essential part of the project.
The project will also investigate the technological characteristics of products obtained from stands where the silvicultural treatment is known, in particular:
Modelling Young's modulus in relation to age from the pith, ring width, wood density in clear specimens of Norway spruce.
Modelling Young's modulus in commercial size boards of Norway spruce. Parameters to include in the modelling will be ring width, wood density and grain angle distribution, size and distribution of knots and Young's modulus on clear wood specimen.
Effect of ring width on ability for rotary cutting in pruned Douglas fir and Norway spruce.
Effect of juvenile wood and heartwood on properties of sawn products (Norway spruce).
Formulation of quality requirements for wood products by the construction industry (Norway spruce).
The execution of the project will be carried out through 12 tasks, which can be grouped in three parts.
Searching and establishing models which relate given silviculture and internal structure of the corresponding trees:
modelling wood density in the tree in relation to silvicultural treatment;
modelling ring width variation in the tree in relation to silvicultural treatment;
modelling spiral grain variation in the tree in relation to silvicultural treatment;
modelling branching in the tree in relation to silvicultural treatment;
modelling bark thickness in the tree in relation to silvicultural treatment.
Feeding of the software SIMQUA with models found in Part 1. Simulation of various visual grading rules (plus wood density); validation of the software:
improvement of the software SIMQUA;
validation of the software SIMQUA.
Technological characteristics of products obtained from stands where silvicultural treatment is known:
influence of juvenile wood and heartwood on properties of sawn products;
effect of ring width on the suitability for rotary cutting in pruned Douglas fir and Norway spruce;
modelling Young's modulus in commercial size boards;
modelling Young's modulus in clear specimens;
formulation of quality requirements for wood products by the construction industry.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Informatik und Informationswissenschaften Software
- Agrarwissenschaften Landwirtschaft, Forstwirtschaft und Fischerei Landwirtschaft Getreide und Ölsaaten
- Agrarwissenschaften Landwirtschaft, Forstwirtschaft und Fischerei Forstwirtschaft Waldbau
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
LL57 2UW Bangor - Gwynedd
Vereinigtes Königreich
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.