Obiettivo
The objective is to obtain higher quality products, in particular talc or chlorite concentrates separated from the carbonates.
Modelization of wet micronization
A complete processing flowsheet for the manufacture of delaminated talcs was fully developed. An estimated price for a 5000 t/year delamination plant was developed.
General conclusion on treatment of talc flotation tailings
A general flowsheet could be applied on talc tailings and on talc crude ore which contain talc, chlorite, dolomite and quartz.
The different operations that must be carried out are:
- talc flotation with a frother reagent where, generally several stages are necessary
- dolomite flotation in weakly acidic media (pH=5.5) with an anionic collector
- chlorite flotation in strong acidic media (pH<3) with short chain amine or quaternary ammonium salts.
These different flotation stages have to be separated by cycloning steps. By this way collector consumption decreases with pulp thickening and the different water circuits could be separated.
Mineral processing research study of talc from Valmalenco
Six complete flow-sheets were tested including attrition, wet screening, classification, grinding and flotation.
Two of them could be adopted to suit the particle size and chemical characteristics of the required product.
The wet circuits tested permitted total recovery of talc in excess of 50%.
Acid leaching tests were performed in order to decrease the Fe2O3 content and increase the brightness of the products. Oxalic acid appears to be the best reagent for this purpose; about 15% of the iron contained in the sample can be extracted. However, the method is not economical since it requires a high temperature (80 C).
Work on the Pyrenean deposits will involve:
development of a flotation upgrading process for some types of waste, permitting separation of the chlorites (of marketable value) from the carbonates (detractive constituents);
direct upgrading of certain qualities in order to obtain, by wet micromilling, ultrafine products that can be used in the form of concentrated slurries in the paper industry;
study of the industrial application of the wet micromilling process, laboratory tested under the previous research contract, and establishment of a complete programme of pilot experiments for modelling the wet micromilling operation as designed for obtaining batches of talcose mineral optimized for incorporation in plastics;
and direct upgrading of certain qualities by heat treatment.
Particular attention will be given to the analysis of dehydroxylation mechanisms with or without fluxing agents. This has 3 main objectives: increasing the internal cohesion of the particles; making substances which combine the advantage of a high refractive index with that of great fineness for use as opacifiers; and making semifinished products for the ceramics industries. In these 3 areas, attention will be given to determining the nature and quantities of residual structural water by infrared spectrometry and proton nuclear magnetic resonance(NMR).
The other part of the project is work on the Valmalenco deposits. On the basis of the knowledge acquired under the previous contract, flotation tests will be carried out on finely milled products in order to determine the optimum operating conditions (chemical treatment, apparatus adjustement parameter, etc). The research objectives are: firstly, to obtain a talc chlorite concentrate; and secondly, to separate the talc from the chlorite.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze chimiche chimica inorganica composti inorganici
- ingegneria e tecnologia ingegneria ambientale attività mineraria e trasformazione dei minerali
- scienze naturali scienze chimiche chimica organica ammine
- ingegneria e tecnologia ingegneria dei materiali ceramica
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
09250 LUZENAC
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.