Obiettivo
The subsurface structures of the sea floor can well be investigated with high resolution reflection seismic methods. Many geotechnical and environmental applications, however, need information on physical and chemical properties of sediments. For their assessment, penetration measurements are being developed combining bore hole logging and coring techniques.
Two types of penetration devices were tested. The geotechnical module operates on the sea floor. Engine driven penetration allows a well controlled insertion of sensors into the sediment with a speed of 2 cm/s. Four parameters are acquired to a depth of 2 m: cone resistance, sleeve friction, excess differential pore pressure and wet bulk density. Furthermore, a 2 m long core can be obtained per launching.
The geophysical in-situ probe is designed for penetrations of 10 m to 20 m into soft sediments, depending on their stiffness. The following parameters are assessed: wet bulk density, natural gamma radiation, electrical resistivity and compressional wave velocities. The sensors are mounted at the lower end of a 10-20 m long penetration tube, which is loaded by a lead weight of 1.5 t at the upper end. The system is lowered by the ships winch to the sea floor, where it penetrates gravitionally into the sediment with a speed of about 10 cm/s. The depth is controlled by a pressure sensor with an accuracy of 1 cm. The data are transferred by cable to the recording and controlling units on board ship.
Results of test measurements in the Baltic Sea show good correlation of physical parameters with siesmostratigraphic units. The geophysical in-situ probe penetration system is a fast and effective tool to assess physical parameters under in-situ conditions. The time for one measurement is only 2-3 minutes.
PROJECT DESCRIPTION:
The knowledge of the physical parameters of marine sediments is important for the identification of sediment types and for the in-situ estimation of the rigidity of the sea-floor. The application of borehole logging methods in a miniaturised form, with probes driven into the sea floor gives direct access to the seismic velocities, electrical conductivity, natural gamma radiation and the U.Th.K - content of the sediment. Other parameters such as porosity, density and permeability can be derived from the logging results. The dynamic shear modulus, which correlates with the shear strength, can be determined from the integrated compressional and shear wave experiment. The shear modulus will also be estimated from tube waves. In combination with high resolution seismic profiling methods, the new tool gives access to a 3-dimensional mapping of structures and the in-situ properties of marine sediments.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze fisiche elettromagnetismo ed elettronica
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sensori
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
24118 Kiel
Germania
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.