Obiettivo
Six gold platinum thermocouples were evaluated in respect of their repeatabilities at the freezing point of silver. Short term repeatabilities determined from measurement sequences at the laboratories were generally found to be better than 0.4 uV or 0.02 C. Reproducibilities between the laboratories varied between 2 uV or 0.1 C for two thermocouples and 13 uV or 0.5 C to 21.7 uV or 0.8 C for the remaining four thermocouples. The immersion characteristics were also checked and it was found that the effect of withdrawing a thermocouple from the freezing point cell generally caused a change in the electromotive force (emf) output equivalent to about 1 uV/cm or 0.04 C over the first few centimetres. Some measurements made at the freezing points of aluminium and tin showed short term repeatabilities similar to the measurements at silver: 0.2 uV or 0.01 C at aluminium and 0.2 uV or 0.02 C at tin. The repeatability at the tin point for measurements alternated with high temperature heat treatment of the thermocouples was 0.4 uV or 0.04 C.
Temperatures between 1000 C and 1600 C are measured in industry by means of platinum-rhodium thermocouples whenever accuracy is required since Chromel Alumel thermocouples used in the lower temperature range are not sufficiently stable. Pyrometers cannot provide accurate measurements unless the emissivity of the surface is very accurately known. Noble metal thermocouples themselves need periodic recalibration because there are a number of damage mechanisms that can cause drifting.
The aim of this project was to evaluate the stability and repeatability of platinum-gold thermocouples that recent work outside Europe has indicated might be useful as new transfer standards between the primary metrology laboratories and the industry calibration laboratories. They appear to be more stable and more accurate and therefore would both facilitate the task of industry laboratories and reduce the work of primary metrology laboratories.
RESULTS
The reproducibility of the measurements with the platinum-gold thermocouples was not significantly better than would be expected with platinum-rhodium thermocouples with differences between the laboratories ranging from 2uV (0.1 C) to 20uV (1 C) depending upon the origin of the thermocuples. However the long term stability of platinum-gold thermocouples is still expected to be better than plutonium-rhodium ones.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze chimiche chimica inorganica metalli di transizione
- scienze naturali scienze chimiche chimica inorganica metalli di post-transizione
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.