Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2022-12-27

INTEGRATED ELECTROMAGNETIC EXPLORATION IN A TARGET AREA OF HYDROCARBONS

Obiettivo

In course of this project the Integrated Electromagnetic Exploration Method (IEMM) shall be refined and then approved on hand of a large scale survey in a target area of hydrocarbons in Northern Germany. It is the goal to demonstrate that the new method is viable in technical and economical aspects and capable to improve the resolution in areas where the standard methods as Seismics have problems. Such typical problematic targets are complex salt structures as to be found in Netherlands, Germany, Spain, Denmark etc. Electromagnetics will give valuable additional information. The combination with seismic data improves the structural resolution.L%
See reports of the leading project TH/01116/88 for results with the passive method. The integration of active and passive method is ongoing. First results are expected by end of 1992.
The Integrated Electromagnetic Exploration Method (IEMM), which will be refined and applied in this project, combines the passive electromagnetics which uses the natural variations of the electric and magnetic field with the active electromagnetics using a transmitter to generate the EM-field variations. The combination of active and passive method improves the data quality in areas with high "cultural noise", mainly caused by load changes of the 50 Hz powerlines as to be found in the industrialized countries in Western Europe, significantly.
The IEMM measures the natural electric and magnetic field variations with several multichannel receivers (3 in this project) simulatenously at different sites in a low to medium dense raster over the target area. As a result of these measurements an impedance tensor can be calculated for each site. The frequency range of the passive EM is starting at 0.25 Hz down to appr. 0.001 Hz. In this frequency range the natural field variations are strong enough to obtain low errors inspite of cultural noise that mainly influences the higher frequency range.
This high frequency range (up to 8 KHz) which contains the information of the more shallow structures is covered with the active electromagnetics. In order to resolve these structures, a raster with a high density of measurement points is measured over the target area. As the active EM is much faster than the passive EM (typically 5-10 times) the field setup provides about 2 times more high frequency measurement sites than low frequency measurement sites.
The Integrated Electromagnetic Exploration (IEEM) is less cost-intensive than a Seismics survey. A preexploration of a possible target with the IEEM will help to reduce exploration costs. A combination of electromagnetics and seismics can give valuable additional information in areas where seismics alone cannot resolve the target as in the case of complex salt structures.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

DEM - Demonstration contracts

Coordinatore

METRONIX Meßgeräte und Elektronik GmbH
Contributo UE
Nessun dato
Indirizzo
Neue Knochenhauer Straße 5
38100 Braunschweig
Germania

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato
Il mio fascicolo 0 0