Obiettivo
This was a technology project in which the main objective was to demonstrate the potential of silica on silicon technology for the fabrication of low-cost single mode passive optical components.
The key feature of using a silicon substrate is that grooves for holding the input and output fibres can be precisely defined as part of the waveguide fabrication process, allowing passive fibre waveguide alignment and making device assembly potentially very low cost. Therefore, a major part of this project was to develop a high-yield, low-cost, integrated process capable of providing high-quality waveguides and precision silicon grooves.
The main objective was to demonstrate the potential of silica on silicon technology for the fabrication of low cost single mode passive optical components. The key feature of using a silicon substrate is that grooves for holding the input and output fibres can be precisely defined as part of the waveguide fabrication process, allowing passive fibre waveguide alignment and making device assembly potentially very low cost. Therefore, a major part of this project was to develop a high yield, low cost, integrated process capable of providing high quality waveguides and precision silicon grooves.
The key achievements of the project overall are summarised as follows: integrated fabrication technology developed, excellent process reproducibility demonstrated, very low loss waveguides achieved (0.1 dB cm{-1} at 1500 nm), passive fibre/waveguides alignment with average losses of less than 0.3 dB per interface achieved, 3 dB directional coupler realised, fully fibre pigtailed in 1 in 16 power splitters and 1 in 4 wavelength mulitplexer/demultiplexer (WMUX/DMUX) devices produced, initial reproducibility and field study on power splitters fibre pigtailed WMUX/DMUX devices completed, feasibility of low loss 1 in 16 WMUX/DMUX demonstrated, low cost potential demonstrated and finally silica on silicon technology shown to be an attractive route to components for the integrated broadband communications network (IBCN).
Technical Approach
The project addressed three main areas:
- the development of fabrication processes to provide high quality waveguides and etched grooves in silicon for fibre alignment on the same wafer.
- the fabrication and evaluation of key prototype passive components for the 1500 nm wavelength region:
- 1:16 optical power splitters
- 4 and 16 channel wavelength mutiplexers/ demultiplexers (WMUX/DMUX)
- 3 dB directional couplers.
- process control, reproducibility and cost.
Key Issues
- Integrated waveguide and etched grooves in silicon process.
- Low-loss passive fibre-waveguide alignment.
- Good process control and reproducibility.
- Low-cost potential of the technology in manufacture.
Achievements
The key achievements of the project overall are summarised as follows:
- integrated fabrication technology developed
- excellent process reproducibility demonstrated
- very low loss waveguides achieved, 0.1 dB/cm at 1500 nm
- passive fibre/waveguides alignment with average losses of < 0.3 dB/interface achieved
- 3 dB directional coupler realised
- fully fibre pigtailed 1:16 power splitters and 1:4 WMUX/DMUX devices produced
- initial reproducibility and field study on power splitters fibre pigtailed WMUX/DMUX devices completed.
- feasibility of low loss 1:16 WMUX/DMUX demonstrated
- low-cost potential demonstrated
- silica on silicon technology shown to be an attractive route to components for the IBCN.
The work on the project has been reported in 15 publications in international journals and a conference.
The current achievements are expected to be exploitable. Discussions have taken place with a SIC production house on the viability of silica on silicon technology for the volume manufacture of passive components. It is concluded that probability of a successful transfer to production are high and that the project has met its main objective of demonstrating the potential of silica on silicon for the fabrication of low cost passive components.
Expected Impact
R1008 will contribute significantly to the overall RACE IBCN objectives in the area of cost reduction of passive optical components. The availability of low-cost components such as WMUX/DMUX devices and power splitters is expected to have a major impact on the economic viability and choice viability and choice of architecture of the IBCN.
This technology has the added potential to produce compact opto-electronic modules of high functionality through the hybridisation of laser, detector and IC chips on the same silicon substrate as the waveguide components and fibre pigtails. No other technology can match all the attractions of silica on silicon, namely, the economic benefits of integration and of totally passive fibre waveguide alignment, the wide range of complex passive components and its overall versatility
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze chimiche chimica inorganica metalloidi
- scienze naturali scienze fisiche ottica fisica dei laser
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Dati non disponibili
Coordinatore
CM17 9NA Harlow
Regno Unito
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.