Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-04-16

Advanced Quantum Well Lasers for Multi-Gigabit Transmission Systems

Ziel

The project objective is to develop highly advanced, quantum well based, semiconductor lasers and modulators of enhanced performance. The specification of these devices will be aligned with IBC network requirements, especially the need to support multi-gigabit systems ( 10 Gbit/s).
The objective of the research was to develop highly advanced quantum well based, semiconductor lasers and modulators with enhanced performance. The specification of these devices has to conform with integrated broadband communications (IBC) network requirements, especially the need to support multigigabit systems (10 gigabet per second).
The key issues comprised of material and device characteristics to produce devices for high speed modulation with high power output, low chirp and high efficiency.

The research resulted in the following achievements:
through investigations of growth techniques were carried out with rapid feedback provided via modelling and sophisticated measurement techniques with atomic monolayer resolution;
a major effort was directed to the realization of advanced device structures (these has been successfully tested in 10 gigabytes per second systems);
threshold current densities as low as 260 amperes per square centimetre in strained gallium indium arsenic phosphide multiple quantum well (MQW) lasers have been obtained;
key optoelectronic components were developed and realized;
quantum well (QW) modulators based on the quantum confirmed stark effect (QCSE) and Warnier stark effect (WSE) were successfully realized in both material systems (ie gallium indium arsenic phosphide/indium phosphide and gallium indium aluminium arsenide/indium phosphide).
Technical Approach

Based on highly advanced, potentially low cost epitaxial technologies, such as MBE/GSMBE/MOMBE and AP/LP MOVPE, both the InGaAsP/InP and InGaAlAs/InP material systems will be exploited in terms of all parameters relevant to QW based lasers and modulators.

Extremely low parasitic laser structures will be realised to reveal the expected device performance increase by QW effects (low temperature sensitivity, high efficiency, high modulation bandwidth, low chirp for QW lasers and high modulation efficiency, extended modulation bandwidth, drastically reduced chirp for QW modulators). This will require a profound understanding of material and device parameters, together with sophisticated characterisation techniques; to give a continuous feedback process towards overall optimisation of devices for system applications.

Key Issues
The key issues for this project comprise control of material and device characteristics so as to produce devices for high speed modulation, high power output with low chirp and high efficiency. This is expected to enhance system structures and performance.

Achievements
Thorough investigations of growth techniques were continued, with rapid feedback provided via modelling and sophisticated measurement techniques with atomic mono-layer resolution. A major effort was directed to the realisation of advanced device structures - these have been successfully tested in 10 Gbit/s systems.

The work has resulted in 51 papers and publications in the past year. Among the best results, world-wide threshold current densities as low as 260A/cm2 in strained GaInAsP MQW lasers have been obtained.

High speed laser structures have reached a mature state thus allowing to take full benefit of QW technology. Nevertheless, new structures with extremely reduced parasitics were developed, exhibiting capacitances in the sub pF range (VUG) and further pushing-up the bandwidth limitation due to parasitic effects.

During 1991, selected strained and unstrained MQW DFB SI BH lasers were delivered to R1051 for system tests. All QW lasers showed excellent results at 10 Gbit/s, bringing Europe to the forefront of the world stage. The AQUA project was represented at the RACE stand on the exhibition during ECOC/IOOC'91 in Paris, with a common demonstration by R1051 and R1057 entitled 8.96 Gbit/s Distribution of 64 (HD)TV Channels to 260 Thousand Subscribers using Novel MQW DFB Laser and Optical Amplifiers. Key opto-electronic components for this were developed and realised within AQUA.

QW modulators based on the QCSE and WSE were successfully realised in both material systems, GaInAsP/InP and GaInAlAs/InP. Rapid progress was enabled by the expertise in QW technology gained within the project, leading to convincing results like high extinction rations over 20dB, low modulation voltages, high bandwidths exceeding 10GHz and initial yet-to-be- optimised devices operating at 5 Gbit/s.

Expected Impact
It is expected that the way towards high speed systems of improved performances will be considerably eased by the availability of QW lasers and modulators. This enhancement of performance will have a market impact on systems allowing for higher data rates and reduced component costs.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Daten nicht verfügbar

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

Daten nicht verfügbar

Koordinator

Alcatel SEL AG
EU-Beitrag
Keine Daten
Adresse
Lorenzstraße 10
70435 Stuttgart
Deutschland

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (7)

Mein Booklet 0 0