Obiettivo The maximal strength level for a given steel composition can be realised with the martensitic microstructure. However, as-quenched martensite shows some major drawbacks such as low formability and low toughness level. Tempering at a relatively low temperature and/or keeping a certain amount of residual austenite in the microstructure could improve these properties.Furthermore, an additional low temperature galvanising treatment will provide an additional corrosion resistance to the hot rolled high strength strips. This development will allow the production of coated ultrahigh strength hot rolled steel (TS higher than 1000MPa) with superior formability and toughness level. Programma(i) ECSC-COAL-STEEL-RTD C - Research Programme of the Research Fund for Coal and Steel Argomento(i) Data not available Invito a presentare proposte Data not available Meccanismo di finanziamento Data not available Coordinatore CENTRE DE RECHERCHES METALLURGIQUES ASBL Contributo UE Nessun dato Indirizzo Avenue Ariane 5 1200 BRUXELLES Belgio Mostra sulla mappa Collegamenti Sito web Opens in new window Costo totale Nessun dato Partecipanti (3) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto KORROSIONS- OCH METALLFORSKNINGSINSTITUTET AB Svezia Contributo UE Nessun dato Indirizzo Drottning Kristinas väg 48 11428 STOCKHOLM Mostra sulla mappa Collegamenti Sito web Opens in new window Costo totale Nessun dato ONDERZOEKSCENTRUM VOOR AANWENDING VAN STAAL N.V. Belgio Contributo UE Nessun dato Indirizzo John Kennedylaan 3 9060 ZELZATE Mostra sulla mappa Collegamenti Sito web Opens in new window Costo totale Nessun dato VOESTALPINE STAHL GMBH Austria Contributo UE Nessun dato Indirizzo VOEST-ALPINE-Strasse 3 4020 LINZ Mostra sulla mappa Collegamenti Sito web Opens in new window Costo totale Nessun dato