Obiettivo
A model quenching chamber has been developed which will allow better knowledge of gas dynamics. The software model allows optimisation of chamber geometry, dielectric recovery in the interelectrode zone to be studied and extrapolation of known results. This in turn will lead to a reduction in tests required and design costs.
The research carried out investigated the reduction or elimination of the time required for prototype testing by developing a computer aided design procedure for circuit breaker chambers within the voltage range 72 to 300 kV and currents between 12 and 60 kA, and with a maximum power of 30 GW. Thus the phenomena related to the switching of short circuit currents in the breakers are modelled. Measurements were taken throughout the research. These covered velocity, temperature and pressure in the odd gas flow, radiation and arc observations.
Spectrographic measurements of the arc temperature and electron density were made up to the region of zero current after a power arc. This was the first time this had been achieved very low current, post-arc, electro-technical measurements were also taken. A new model for arc-network interaction may result from this work.
The calculations were compared to actual experience in the real industrial situation. Overall quantities, corresponding to the energy state of the equipment, namely the arc voltage and gas pressure were compared. The data are good enough for the other data specified in the model to appear credible.
Circuit breaker design is still achieved using semiempirical rules and so it requires long and expensive tests. The objective of this project is to develop a software tool in order to reduce this testing time and the costs involved. To fit into existing computers, the physical hypotheses, mathematical methods, and numerical simulation must have a reasonable processing time.
Amid viscosity and turbulence were ignored and the Euler equations therefore have to be solved. Given the experimental conditions, this is a reasonable hypothesis. Geometry was assumed to be axisymmetric, which could be justified in view of the arc rotation.
The numerical method was based on the Godounov scheme. A Collela solver, chosen for its efficient calculations, is well adapted to the real properties of sulphur hexafluoride variations between 250 k and 30,000 k.
The arc allowances called for it to be treated as a gas whose properties were taken as those of sulphur haxafluoride as regards thermodynamic and electrical behaviour levels. Consequently, the conductive and convective fluxes had also to be taken into account. Radiative exchanges were treated following the work of Lowe.
THE AIM OF THE PROJECT IS TO REDUCE OR ELIMINATE THE TIME REQUIRED FOR PROTOTYPE TESTING BY DEVELOPING A COMPUTER AIDED DESIGN PROCEDURE FOR CIRCUIT BREAKER CHAMBERS WITHIN THE VOLTAGE RANGE 72 TO 300 KV AND CURRENTS BETWEEN 12 AND 60 KA, AND WITH A MAXIMUM POWER OF 30 GW: THE PHENOMENA RELATED TO THE SWITCHING OF SHORT CIRCUIT CURRENTS IN THE BREAKERS ARE MODELLED.
COMPARISONS ARE MADE BETWEEN THE MODEL AND EXPERIMENTAL TESTS.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali informatica e scienze dell'informazione software
- scienze naturali matematica matematica pura geometria
- scienze naturali matematica matematica applicata analisi numerica
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
4000 LIEGE
Belgio
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.