European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-04-15

PREPARATION, COMPOUNDING AND PROCESING OF POLYMER ALLOYS FOR ELECTROTECHNICAL APPLICATIONS

Objetivo


PE/PS and PE/PA 6 alloys for use in high voltage direct current cables were developed; this research may lead to a new generation of cables which no longer need impregnated paper.

New diblock copolymers (HPB-b-PA and HPB-b-PMMA) were also developed. These may lead to a new generation of recyclable materials (polyolefin/PA 6 alloys, polyolefin/polyester alloys and polyolefin/inorganic filler alloys).
THE PROJECT IS INTENDED TO SHOW THE SUPERIORITY OF POLYMERIC ALLOYS OVER POLYMER-ADDITIVE MIXTURES IN ELECTRICAL ENGINEERING APPLICATIONS SUCH AS ELECTRIC CABLES, INSULATING MATERIALS FOR SUPPORTS, HIGH VOLTAGE INSULATORS, CAPACITORS.
MIXING DIFFERENT KINDS OF POLYMERS MAY BRING ENHANCEMENT OF THEIR ELECTRICAL PROPERTIES, BUT USUALLY POLYMER BLENDS HAVE BAD MECHANICAL PROPERTIES, UNLESS ALLOYED BY APPROPRIATE COMPATIBILIZING AGENTS SUCH AS SEQUENCED BLOCK COPOLYMERS.
SUCH AGENTS MAY ALSO BE USED FOR "ALLOYING" INORGANIC MATERIALS AND POLYMERIC MATERIALS.

THE AIM OF THE PROJECT IS THE OPTIMIZATION OF POLYMER ALLOYS CONTAINING POLYOLEFINIC MATERIAL AND ANOTHER PHASE SUCH AS A POLAR POLYMER, A THERMALLY CONDUCTIVE INORGANIC MATERIAL, ETC.

Tema(s)

Data not available

Convocatoria de propuestas

Data not available

Régimen de financiación

CSC - Cost-sharing contracts

Coordinador

Compagnie Générale d'Electricité (CGE)
Aportación de la UE
Sin datos
Dirección
Route de Nozay
91460 Marcoussis
Francia

Ver en el mapa

Coste total
Sin datos

Participantes (2)