European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-04-15

PREPARATION, COMPOUNDING AND PROCESING OF POLYMER ALLOYS FOR ELECTROTECHNICAL APPLICATIONS

Cel


PE/PS and PE/PA 6 alloys for use in high voltage direct current cables were developed; this research may lead to a new generation of cables which no longer need impregnated paper.

New diblock copolymers (HPB-b-PA and HPB-b-PMMA) were also developed. These may lead to a new generation of recyclable materials (polyolefin/PA 6 alloys, polyolefin/polyester alloys and polyolefin/inorganic filler alloys).
THE PROJECT IS INTENDED TO SHOW THE SUPERIORITY OF POLYMERIC ALLOYS OVER POLYMER-ADDITIVE MIXTURES IN ELECTRICAL ENGINEERING APPLICATIONS SUCH AS ELECTRIC CABLES, INSULATING MATERIALS FOR SUPPORTS, HIGH VOLTAGE INSULATORS, CAPACITORS.
MIXING DIFFERENT KINDS OF POLYMERS MAY BRING ENHANCEMENT OF THEIR ELECTRICAL PROPERTIES, BUT USUALLY POLYMER BLENDS HAVE BAD MECHANICAL PROPERTIES, UNLESS ALLOYED BY APPROPRIATE COMPATIBILIZING AGENTS SUCH AS SEQUENCED BLOCK COPOLYMERS.
SUCH AGENTS MAY ALSO BE USED FOR "ALLOYING" INORGANIC MATERIALS AND POLYMERIC MATERIALS.

THE AIM OF THE PROJECT IS THE OPTIMIZATION OF POLYMER ALLOYS CONTAINING POLYOLEFINIC MATERIAL AND ANOTHER PHASE SUCH AS A POLAR POLYMER, A THERMALLY CONDUCTIVE INORGANIC MATERIAL, ETC.

Temat(-y)

Data not available

Zaproszenie do składania wniosków

Data not available

System finansowania

CSC - Cost-sharing contracts

Koordynator

Compagnie Générale d'Electricité (CGE)
Wkład UE
Brak danych
Adres
Route de Nozay
91460 Marcoussis
Francja

Zobacz na mapie

Koszt całkowity
Brak danych

Uczestnicy (2)