Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-04-16

THE ANALYSIS OF MONOLAYER SEGREGANTS IN STEELS

Obiettivo



The presence of impurities at grain boundaries in steels can cause intergranular brittle failure in stress corrosion, impact or creep situations. Identification and quantification of these segregants is often carried out using Auger electron spectroscopy. However, the lack of reproducibility of AES instruments in the quantitative mode frequently makes it difficult to relate measurements made in different laboratories. A reference material with known and reproducible segregants for the major impurities encountered in practice, (P; Sn, Sb and S) has therefore been produced.

RESULTS

Difficulties in the fabrication of the low alloy steel restricted the segregant elements to P and Sn. When the heat treated at 200 C for 2 hours, water quenched and further heat treated for 48 hours at 580 C a reproducible segregation of the impurity elements was achieved. The samples were then broken under high vacuum and analyzed using AES.

After calibration of the spectrometer energy and intensity scales using the procedures developed under project RM 193, the laboratories participating in the intercomparison agreed to within +/- 15% on concentrations of the segregated P and Sn equivalent to approximately 30% of a monolayer. This represents an improvement of over an order of magnitude.

The calibration of the material is based upon the intercomparison and literature values for the Auger electron yields. Absolute certification of the material is therefore not possible but it is made available to AES users for the validation of their instrumental factors and procedures.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Dati non disponibili

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

CSC - Cost-sharing contracts

Coordinatore

National Physical Laboratory (NPL)
Contributo UE
Nessun dato
Indirizzo
Queen's Road
TW11 0LW Teddington
Regno Unito

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato
Il mio fascicolo 0 0