Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-04-16

SPECIFIC MIGRATION FROM PLASTIC MATERIALS

Obiettivo



The Commission is in the process of completing the Community law in the sector of plastic materials as laid down in the Framework Directive (89/109/EEC) relating to materials and articles intended to come into contact with foodstuffs. According to Directive 90/128/EEC a number of monomers and starting substances can be used for the preparation of plastic materials. The maximum quantity of these monomers and starting substances that can be released from the plastics materials into foodstuffs (SML), or may be present in the material as residual (QM), is established in the above Directive.
Verification of compliance with the migration limits shall be carried out in accordance with Directives 82/711/EEC, 85/572/EEC and 128/90/EEC, which concern the basic rules for testing migration, the list of simulants to be used for testing migration and establish the specific migration limits respectively.
According to the above Directives, CEN is about to complete methods for the measurement of migration of several monomers. However, methods for the determination of more than 40 monomers are urgently needed, and many more will be required when additives are considered under Directive 90/128/EEC. The objective of the project is to develop the basic methodology for determination of monomers with emphasis on multi-methods. These methods will be drafted as CEN norms, CEN taking responsibility for their validation. The project includes preparation of a handbook of analytical data.

STATUS

The preparation of a handbook of spectral and physico-chemical data of monomers has been undertaken in conjunction with a bank of monomers and starting substances by the Food Science Laboratory, MAFF, Norwich, U.K..
Priorities for method development have been established in collaboration with other organisations and support to basic method development by Community laboratories is being arranged.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Dati non disponibili

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

CSC - Cost-sharing contracts

Coordinatore

Imperial Chemical Industries plc (ICI)
Contributo UE
Nessun dato
Indirizzo
Wilton Materials Research Centre
TS6 8JE Middlesbrough
Regno Unito

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato

Partecipanti (20)

Il mio fascicolo 0 0