Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2022-12-27

SOLAR PLANT FOR HOT WATER USED IN LAMINATED GLASS PRODUCTION

Ziel

This project demonstrates the technical and economic feasibility of using solar energy as a source of heat for industrial water required at 70 deg C for washing sheets of glass in a laminated safety glass production line. Covering two shifts, about 14 000 litres of water are used. The energy savings are estimated at 9 TOE per year and the payback time is 8 years (or on a 15 year life cycle basis, the energy produced is cheaper than electricity).

Water used in the glass washing process was heated by resistance heaters. The system under investigation uses high efficiency CORTEC solar collectors which have a number of advantages in this application:
-much higher heat output than that plate collectors at all operating temperatures, and an estimated 69% efficiency at an operating temperature of 70 deg C.
-a reliable source of energy; essential to any industrial process
-satisfactory resistance to weathering and chemical agents due to the pyrex glass pipes which make up these collectors.
In this application the innovation is in the use of this type collector for an industrial process. Regarding the hot water requirements, a number of assumptions regarding the dimensions of the plant have been advanced, bearing in mind the following points:
- during the month of August, the solar plant cannot be used, because the factory is closed for annual holidays.
- to avoid the solar plant being over-dimensioned for the summer period - thatis, to avoid most of the energy captured during the summer months being wasted - the design ensures that the solar energy supplies only a percentage, albeit high, of the annual energy requirement. Obviously, during the winter months, the plant will in any case only provide the energy needed for pre-heating the water.
- the user requires hot water five days a week.
- in order to design the heat storage system correctly, account therefore had to be taken of the need to store the energy captured during non-working days (Saturday and Sunday).
A small storage system would result in the water becoming too hot.
On the other hand, too big a storage system would not produce the desired temperature; moreover, it has to be remembered that such plant would also cost more.
This configuration supplies 30-40% of the required energy from November to February and 100% in July.
- Cortec solar collectors with vacuum-sealed pipes, selective surface installed at ground level on a concrete plinth.
- Thermally-insulated, 10 000-litre thermal storage, consisting of two 5 000-litre tanks.
- Plate-type heat-exchanger.
- Pumping group, consisting of twin electro-pumps, complete with intercepting and filtering equipment.
The estimated "turnkey" cost of the above, is estimated at lit. 90 mil

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

DEM - Demonstration contracts

Koordinator

Società Italiana Vetro
EU-Beitrag
Keine Daten
Adresse
Via G. d Grassi 8
20123 Milano
Italien

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten
Mein Booklet 0 0