Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-06-12

In house determination of electrical resistance of anti-static and conductive footwear

Ziel

Objectives
The objectives of the work in this project were to develop new production and workplace test methods for assessing the dissipative qualities of footwear. It was seen to be necessary to establish the correlation not only between the new production and workplace test methods but also between each and the current relevant standard, EN344.

State of progress
The results have clearly highlighted the shortcomings of existing standards and other common methods of measuring footwear resistance. By designing and testing new measurement equipment it has been shown how these shortcomings can be overcome.
The results can now be used to describe methods to obtain reproducible measurements with a direct relationship between a bench-top test in a Quality Control environment and test on footwear actually being worn in a work environment. It is hoped that these methods will be incorporated into a new standard.
In addition, the experimental prototype equipment used for the work can become the starting point for development of marketable products able to carry out the tests according to the recommended methods. It is the intention of one of the project partners to progress this and add the new product to their range of products aimed at similar markets.
////
//PROG_ACR
SMT
//PJ_PJ_RPG

Background
It is well recognised that electrostatic charge on personnel can lead to electrical discharges which can be damaging or dangerous. Such discharges can cause anything from detonation of explosives and ignition of permanent gases through to ignition of solvent vapours, aerosols and even dust clouds. The risk may be minimised by ensuring personnel wear footwear that is able to dissipate unwanted electrostatic charge. Consequently footwear manufacturers need tests to be able to assess the dissipative qualities of their products.
Unfortunately, existing standardised tests are slow to carry out and destructive. They cannot therefore be used either for 100% testing on the production plant or for routine monitoring of continued good performance in the user's workplace. Some workplace tests have been recommended but they cannot be related directly to the current tests used by manufacturers.
Workprogramme
A study of the factors affecting electrical resistance of footwear has been carried out both by reference to literature and by experiment. Based on these results two experimental prototype test and measurement systems were designed and constructed. These were tested on a range of commercially available footwear. The ease of use and the results obtained, together with other factors were then reviewed in order to propose improvements during further developments.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

CSC - Cost-sharing contracts

Koordinator

Chilworth Technology Ltd
EU-Beitrag
Keine Daten
Adresse
Beta House Chilworth Research Centre
SO16 7NS Southampton
Vereinigtes Königreich

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten

Beteiligte (2)

Mein Booklet 0 0