Obiettivo
The STSARCES project aims at speeding up not only the revision of EN 954 part 1 and the drafting of emerging standards like the EN 954 part 2, but also their harmonised putting into practice by test-houses as well as by manufacturers of the European Union.
Links need to be established to avoid divergences of EN 954 with international basic safety standards.-
The methodology is based on the concept of the overall safety lifecycle of a system, which is quite new in the field of the machinery and covers both hardware and software in an integrated way. A significant part of the results deal with the software life cycle, since this is not developed in EN 954.The Markov modelling approach, also very innovative when applied to the field of the machinery, has revealed very successful. The immense influence of the diagnostic coverage could be demonstrated and data on appropriate on-line test intervals for these dedicated architectures proposed in the methodology, combined with realistic MTTF values, are provided and justified. Such information provides fundamental advice for the system designer as well as hints for the persons carrying out the evaluations. STSARCES succeeds to determine validation methods of programmable electronic systems in their use for safety functions both in EN 954 and draft IEC 62061, a machine application standard derived from IEC 61508. It does allow defining credible and understandable links between CATEGORIES (EN 954) and Safety Integrity Levels or SILs (draft IEC 62061). This connection is indispensable during the design and development phases of control circuits for the machinery, which make use of components based on the category concept, like mechanical, hydraulic, pneumatic, electro-mechanical ones, and simultaneously of programmable electronic systems, better characterised by the SIL concept.
Technical reports on software safety were yet transferred at mid-term to TC 44 WG 7 for IEC 62061. The results were presented to CEN TC 114 WG6 CD-ROMs of the Final Report were disseminated. The Final Report will be made available during the summer 2000 on the European Network SAFETYNET with comprehensive links to all technical annexes.
Background
In the field of machinery safety, the essential requirements regarding the safety-related parts of control systems are covered by EN 954 part 1 (1996) dealing with general principles for design. Current work on the validation process of such systems, including both analysis and testing, has demonstrated that no harmonised validation procedures exist for safety-related complex electronic systems, which are becoming of a generalised use in the machinery sector, and include often today programmable technologies. Furthermore, deterministic validation methods, commonly used with low complexity systems, are faced with practical limitations.
Work-Programme
(1) software aspects need investigating tools for avoidance of systematic faults.
(2)Testing procedures need to be supplemented by analysis of the design to properly evaluate safety performances of both hardware and software elements.
(3) understandable links for the machinery sector need to be established between EN 954 and IEC 61508.
(4)With respect to industry interests, consideration of innovative technologies and designs, in close relationship with manufacturers in the consortium, must be incorporated, to avoid innovation (i.e. competitiveness of the European industry) obstacles by emerging standards.are.
pr
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali informatica e scienze dell'informazione software
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sistemi di controllo
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
60550 VERNEUIL EN HALATTE
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.