Obiettivo
The principal objective of this project was to develop a new on-line measurement system based on infrared attenuated total reflection (ATR) using a polymer-coated sapphire rod for direct quantification of the total hydrocarbon index in water employing the C-H stretching vibration. The sensor was evaluated via laboratory and industrial trials and was developed to a pre-competitive technical prototype stage.
An on-line hydrocarbons in water measurement prototype system was developed. The LOD at present for the laboratory prototype, is 5ppb for Undecane with a PDMS sensing layer. The detection limit for the smaller hydrocarbons is in the region of 10ppm. The prototype system has achieved similar sensitivities. This is sufficient for an alarm level indicator for river water intake.
The ability to measure a wide range of hydrocarbons was shown for the range of aliphatic hydrocarbons from C5 to C20. A prototype system was developed and tested on site at a water treatment works by an industrial partner. The performance to date has shown good reliability with no erroneous readings and compares favourably with existing commercial monitors.
Background
Hydrocarbons can enter surface water by anthropogenic means from industrial discharges and by spillages. In the case of heavier accidents hydrocarbons may even enter groundwater and as a result pose a threat to human health. In recent years the standard procedure for the determination of hydrocarbons in water included extraction using perhalogenated solvents and subsequent IR spectrometry. However, these solvents have been shown to be hazardous to the environment and must be removed from future use due to EU legislation. Also laboratory analysis by its nature is time consuming, expensive and the inherent time delay means that environmental damage is not being properly monitored.
Work Programme
To achieve the project goals the following work packages were undertaken: (1) Instrument Definition: including a review of relevant component technology, identification of analytes to be detected, instrument design and definition of a comprehensive measurement methodology. (2) Sensor Head Optimisation: identification and evaluation of appropriate polymers, functionality testing of the polymer coated sapphire rods and optimisation of the sensor head. (3) System Integration: fabrication and testing of the technical prototype and software development. (4) System Calibration and Optimisation. (5) Industrial Evaluation by End Users: incorporating field trials at end user sites.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze chimiche chimica organica idrocarburi
- scienze naturali informatica e scienze dell'informazione software sviluppo software
- scienze naturali scienze chimiche scienze dei polimeri
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sensori
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
9 Dublin
Irlanda
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.