Obiettivo
Background: A wide ranging survey of SMEs showed a need to reduce fabrication flaws associated with welds. An in-process sensing technique would significantly help control their welding process and reduce weld flaws. At present sensors that monitor the weld from the same side as the weld torch, known as top face sensors, do not meet industry requirements, as they cannot compensate for all of the variations that lead to defective welds. This project will develop a top face sensor capable of adaptive control of industrial fusion welding processes. It will derive control algorithms for TIG, wire fed TIG, MIG/MAG and laser welding operations. The system will be attractive to industry as it is more practicable and economic than sensing from the back of the weld. This innovative approach will use two complementary sensing techniques. Empirically derived algorithms will control the process by monitoring changes in the weld pool width and thermal profile. The sensor system will prevent defects such as inadequate penetration and lack of seam tracking, and reduce the number of flaws caused by joint misalignment, changing section thickness and variable joint gap.
Objectives:
- To develop algorithms for controlling arc and laser welding operations;
- To produce a prototype industrial control system;
- To conduct a series of end user trials;
- To formulate an exploitation strategy Work programme.
The project brings together manufacturers and developers of welding equipment, sensors and weld controllers. The group of end users associated with the project is drawn from a wide range of industries and will aid specification and assessment of the prototype. The first task focuses on the specification of the prototype. The systems for individual welding techniques are developed in parallel with a delay between starting dates so that each can build on the experience gained in preceding tasks. The sensor will be developed for autogenous TIG, wire fed TIG, MIG and laser welding. The same approach will be adopted for each task; process evaluation, development of the control algorithms, construction of a prototype controller and, finally, end- user trials. The basic control system will be similar for each welding process, but the complexity of the monitoring and control algorithms will vary. The tasks are scheduled in order of increasing difficulty.
State of progress: As the project commenced in October 1999, only limited progress has been possible so far. Evaluation trials are underway on alternative cameras including CCD and infrared cameras.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sistemi di controllo
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sensori sensori ottici
- scienze naturali scienze fisiche ottica fisica dei laser
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
SL6 6NQ Pinkneys Green - Berks
Regno Unito
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.