Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2022-12-27

ACOUSTIC MEASUREMENTS ON RESERVOIR ROCK

Obiettivo

The objective of the research is to determine more rock properties from the microseismogram obtained via borehole measurements with the Sonic tool.
- An atmospheric acoustic measurement set-up has been constructed consisting of : XYZ system, programmable waveform generator, oscilloscope, transducers and amplifiers. The equipment is controled by an IBM PC and allows the storage, plotting and calculation of the data. Both refraction and transmission measurements can be performed.
- A borehole simulator (triaxial cell) has been designed and built allowing acousting refraction measurements at 435 bar and 150 degrees C at conditions corresponding to 4000 m depth. The sample size is 400 mm in diameter with a height of 600 mm.
- Establishing a relation of rock properties with acoustic properties from field microseismograms is extremely difficult because too many unknown factors are present.
- Reservoir samples can be constructed in the laboratory with the silica-lock process or with araldite in which one rock property can be changed keeping the other properties constant. The rock behaves as real subsurface reservoir rock.
- The software developed for this project gives theoretical estimates that highly improves the interpretation of the experiments. The computer models are based on the Biot theory and Biot theory with a frequency limit.
- Using the transmission measurements with Plona's method the attenuation constants of the rock are determined with three methods. The methods compare very well. It is therefore advised to use the highest amplitude method.
-The computer program using the 'Biot theory with frequency limit' is very fast and gives accurate wave mode velocitites. The attenuation of shear and fast compressional are predicted accurately. The attenuation of the slow compressional mode is not correct.
During the field applications new evaluation methods have been developed:
1. The shale fraction present in a reservoir can consist of a varying mixture of different clay minerals. Each mixture is characterized by its own shale point, resulting in a range of five shale points valid for the reservoir interval in our shaly sandstone example.
2. A method is proposed to obtain the five shale points from the logs.
3. As a result the hydrocarbon conten of the reservoir is determined more accurately.
Microseismograms are measured under atmospheric pressure and room temperature on artificially created rock. The synthetic rock closely resembles "natural" sandstone but it has the advantage that all rock parameters are known exactly and can be changed independently. Thus by changing one rock parameter it is attempted to establish a correlation between that particular parameter and the received microseismogram. To investigate the influence of pressure and temperature on the recorded wave train the acoustic measurements will also be performed in a triaxial cell under conditions of up to 400 bar pressure and 150 deg. C.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

DEM - Demonstration contracts

Coordinatore

COLLEGE VAN BESTUUR DELFT UNIVERSITY OF TECHNOLO
Contributo UE
Nessun dato
Indirizzo
BUREAU HOGESCHOOL COLLEGE VAN BESTUUR P.O. BOX 5
2600 AA DELFT
Paesi Bassi

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato
Il mio fascicolo 0 0