Ziel
In 'no seismic record' areas transient electromagnetic soundings can provide information of the subsurface structure. Our aim is the development of a transient EM field system including a portable receiver, field application, development of data processing and interpretation techniques. This work is to be carry out in conjunction with the oil industry in order to directly evaluate the potential application of the technique.
The developed hardware consists of a grounded wire transmitter, a portable, DC operated digital data acquisition system, data processing and interpretation workstation which is being used to produce the preliminary in-field interpretation. Major developments and improvements were done for all parts of the hardware.
The entire hardware was tested from the very beginning to the very during test surveys in the field.
The data processing was completely redesigned and successfully tested using a pre-stack data processing system. This system significantly increases the signal-to-noise ratio. During all stages of the processing, quality control routines can be run, thus testing the reliability of the data.
In order to adjust the developed technology to related exploration problems within the European Community, several numerical feasibility studies were conducted for exploration problems ( hydrocarbon and geothermal) in several countries of the European Community.
A new approach of further improving the signal-to-noise ratio has been developed and tested. We call this approach "local noise compensation" which is being done by maintaining a base station during an entire survey day as reference station. Mobile receivers are then moved around in a vicinity of that base station. Under the assumption that the noise does not very much spatially the field data of the mobile receivers can be subtracting the noise derived at each particular time of the day at the base station.
The interpretation of the transient electromagnetic data was improved by adding a statistical inversion package to the interpretation which gives error bounds of the individual earth model parameters. Also three dimensional modelling was done to test particularily anomalous transients. The three dimensional modelling of specific problems can either be done using numerical modelling techniques such as integral equations or reduction of the surface anomaly onto a thin latteraly inhomogeneous conductive plate.
With these techniques we were able to simulate several phenomenons which we have observed in the field such a sign reversals during he measurement time of the signal.
During all phases of the project these techyniques were successfully tested in the field by carriying out field surveys over several geophysical targets. These targets included immediate exploration targets as well as geophysical comparative studies.
In almost all cases the results compared very well with other geophysical/geological informations giving us confidence in our development.
The project is divided into hardware, data processing, interpretation, and technology transfer tasks. The hardware development included improvements and/or completely new developments of parts of the entire field system. A transient electromagnetic field system consists of a grounded wire, high current transmitter, a portable receiver and a data processing and interpretation workstation which is used for the in-field data processing and preliminary data interpretation. The development of data processing techniques included the design, building and testing of a complete pre-stack data processing system which allows us to obtain a sufficient signal-to-noise ratio even in Western Europe. The research conducted on the interpretation part of transient electro-magnetic data included improvements of the inversion to obtain for the interpreter inversion statistics and error bounds of the individual earth model parameters, three dimensional numerical modelling, and three dimensional analogue scale modelling. Strong collaboration with the oil industry and other scientists helped to obtain the necessary feedback for the system design and specification. During all phases of the project, field tests were done to check hardware, data processing and interpretation schemes.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
5000 Köln
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.