Obiettivo
Design. Build and put into operation a field pilot for a EOR process by non-miscible CO2-rich gas injection into the very heavy (10 to 15 degrees API) oil field of Ponte Dirillo, Italy.
The Ponte Dirillo deposit produces a heavy oil from two heavily -fractured carbonated reservoirs. Laboratory studies and well -logging of certain reservoir areas have made it possible to determine a recovery method involving injection of a non-miscible CO2 enriched gas at the top of the deposit in order to replace the natural thrust of the bottom water. In addition, gas injection at the water-oil contact level can reduce well problems caused by the water level rising. The fluid injected was a mixture of CO2 enriched gas produced by the Gela field and natural gas from the regional grid.
To carry out the project it was necessary to build gas-injection equipment for the wells selected, facilities to separate the oil produced and equipment linking up with the Gela field's production centre.
Several types of tests were carried out :
- Injection of a large volume of high pressure gas in a peripheral well at the oil water contact level. The results were good, with an increase in daily production from 120 cubic metres in March 1984 to 180 cubic meters in June 1984. This type of injection has proved to be an effective way of combating a rise in the water level.
- Gas injection in a central well with cycles consisting of injection followed, after a rest period, by bringing into production ("huff-n-puff" method). The results were disappointing because of problems resulting from the vertical migration of the gas and too short a residence time in the vicinity of the well.
- Gas injection at the top of the deposit ensured a better rate of recovery of the oil in place without increasing water production ( 260 cubic metres a day in December 1985).
Significant results in terms of the production at the Ponte Dirillo field were achieved.
The project is based on the results of a previous study, carried out on the heavy oil field of Gela (contract 00016-75) of similar characteristics. A campaign of well surveys, laboratory tests and a numerical model simulation were carried out. The pilot plant was designed, built and put into operation.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
20097 S. Donato Milanese (MILANO)
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.